D-104 & HW-101

[W6CUX]

The link below will lead you to the schematic:
http://www.qsl.net/wa2mzf/d1042.jpg

White is the audio cable and connects to pin1, Red is PTT to pin2, shield
and blue to spring.

I have used the D104 in both amplified and none-amplified versions on my
HW-101 and find they both work equally well. With close talking, the MicGain
at 11:00 or 12:00 will fully modulate the audio. Makes a nice combo.

73, Stu W6CUX

----- Original Message -----
From: "paul hendershott" <pjhender2002 at YAHOO.COM>
To: <BOATANCHORS at LISTSERV.TEMPE.GOV>
Sent: Monday, August 02, 2004 2:48 PM
Subject: D-104 & HW-101


> Hi folks - I picked up a new D-104 (transistorized version) without a
wiring diagram. My intention is to use it with my hw-101 and other Heath
xcvr's. Would anyone be able to tell me the correct connector wiring? I see
black,blue,red,yellow,white, & shield. tnx!
> 73
> Paul
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/BOATANCHORS.html