Need help with Halli speaker ID

[RJ Mattson]

Hi Ken
Here is a site that does a good job to id ham speakers.
http://www.virhistory.com/ham/speakers.htm
Hope it helps,
bob..w2ami
www.qrz.com/callsign/w2ami

----- Original Message -----
From: "Ken Simpson, W8EK" <W8EK at SPEAKEASY.NET>

I need some help on identifying a speaker I found.

It is a Hallicrafters speaker.  It is about 6 inches square in the
front, and about 3 1/2 inches deep.  It has a dark gray bezel around the
front, with "hallicrafters" at the bottom, and the Halli "h" above it in
the middle.  The speaker case (back and all 4 sides) is a lighter gray,
and has rounded corners in the back.  It is fairly heavy for its size --
about 2 1/2  or 3 pounds.  There is a strain relief in the bottom of the
back, where the cord comes out.
I don't remember what it matched, or its number.  Any one help?
Thanks.
73,
Ken, W8EK

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/BOATANCHORS.html