Ceramic Rotary Switch Repair

[Ed Swynar]

Hi Tim,

Good old-fashioned, 24-hour-cure EPOXY should work A-OK for you...put lots
on, including the visible surfaces, & don't worry about appearances.

I've used it on those phenolic wafer switches in Heath gear with excellent
results.

~73~ Eddy VE3CUI - VE3XZ



----- Original Message -----
From: "Tim Richardson" <timrichardson at BELLSOUTH.NET>
To: <BOATANCHORS at LISTSERV.TEMPE.GOV>
Sent: Friday, October 22, 2004 4:40 PM
Subject: Ceramic Rotary Switch Repair


> Have a 1 pole 12 throw ceramic rotary switch in an old Dentron antenna
tuner
> that has a broken wafer. Nice clean break. Any suggestions on a glue to
use
> for repair?
>
> Tim W4IOU
> timrichardson at bellsouth.net
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
> To post - BOATANCHORS at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/BOATANCHORS.html
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/BOATANCHORS.html