GB> Re: DX-60 oscillator circuit

[Brian Carling]

On 31 Dec 2005 at 15:13, Kenneth G. Gordon wrote:

> > I have just removed the erroneous "33 ohm resistor" (actually 37 
> > ohms) that was in the place of the 33,000 ohm resistor at R26
> 
> Yow! That is one heck of a difference. Isn't R-26 in the cathode of one 
> of the audio tubes? If so, according to my schematic that should be 
> 3.3K, not 33K.

OK that wrong resistor has been replaced with a combination 
procuding about 31.5K = close enough for a 33K.

I also found that the 6DE7 tube was DEAD. Not surprising after 
forcing so much current through it. I have another tube in there 
now, and guess what?
It sounds great - even with an AMPLIFIED D104, hi hi!

See you all on CW or AM soon!

73 - Bry, AF4K

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/BOATANCHORS.html