Drake R-4C Dial Calibration

[Don]

Thanks Darrell, that is exactly what I needed to know and the receiver now 
has the dials properly aligned.

To everyone who responded .. thanks.

Don K7FJ

> I believe that if you will pull back on the spring loaded idler gear, you 
> will find that you can rotate the dials and line them up.
>
> Fraternally,
> Darrell, WA5VGO
>
>
>
> At 09:10 PM 11/5/2005 -0800, you wrote:
>>I am fixing up a friends R-4C and find that the position of the circular 
>>dial that displays 100 KHz steps  is out of position.  Everything works 
>>fine with this radio but I am reluctant to dissasemble the whole tuning 
>>mechanism just so I can find out how to loosen whatever holds that round 
>>plastic dial in place and give it a turn to the right of 30 degrees or so.
>>
>>Any suggestions?
>>
>>Don K7FJ
>>
>>-----------------------------------------------------------
>>This list is a public service of the City of Tempe, Arizona
>>-----------------------------------------------------------
>>
>>Subscription control - 
>>http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
>>To post - BOATANCHORS at LISTSERV.TEMPE.GOV
>>Archives - http://listserv.tempe.gov/archives/BOATANCHORS.html
>
>
> 

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/BOATANCHORS.html