Heath SB-Line meter needed

[Glen Zook]

The meter in my SB-630 has "given up the ghost".  I
did try to repair it but it is beyond repair.

Now, this meter "looks like" the "S" meter in the
SB-Line receivers and transceivers and the meter on
the SB-400 and SB-401 transmitter.  However, the meter
movement in the SB-630 is completely different from
the other units.  It is a 100 uA with a resistance of
800 ohms.  The "normal" meter is 1 mA at 100 ohms. 
Again, the meter movement that I need is 100 uA with a
resistance of 800 ohms.

I do not know if the SWR bridges use this value meter.
 The meter scale can be removed very easily so if one
from an SWR bridge is the correct value then there
will be no problem.

The full scale reading and the internal resistance of
the Heath meters is listed on the lower right-hand
side of the scale just above the screw that holds the
scale in place.

Will pay a reasonable amount for a meter or have all
sorts of things that I can trade including tubes,
variable capacitors, plug-in coils, etc.



Glen, K9STH

Web sites

http://home.comcast.net/~k9sth
http://home.comcast.net/~zcomco


		
__________________________________ 
Start your day with Yahoo! - Make it your home page! 
http://www.yahoo.com/r/hs

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/BOATANCHORS.html