For Sale: Swan, National, Kenwood, Heathkit, Ten-Tec and More

[David Hollander]

Here are some items for sale.  Prices do not include shipping.  I will 
ship overseas.

Swan 600R Custom Receiver with SS-16B Filter....$350 plus shipping
This radio covers 80-10 meters and matches the Swan 600T transmitter. 
The custom model comes with the Noise Blanker, Variable Notch Filter, 
and 16 pole SS-16B SSB filters.The radio is in excellent condition and 
receives well. The insides of the unit are also very clean. The power 
transformer has been replaced and the new one can be seen in the last 
photo. The only other issue is that one of the disks is missing from one 
of the knobs.
http://members.cox.net/radiodx3/swan600r.JPG
http://members.cox.net/radiodx3/swan600r4.JPG
http://members.cox.net/radiodx3/swan600r3.JPG

Rare” National Radio NC-45.............$125 plus shipping
This is an 8 tube receiver made from 1941-1945 covering 550 kHz to 30 
MHz. Most models made were made the NC-45 which is an ac/dc receiver. 
The NC-45A has a transformer operated power supply. This radio does work 
and receives signals on all bands but it really need to be recapped and 
aligned. Cosmetically OK but also needs to be cleaned up.  The insides 
look OK but also need to be cleaned up. One interesting thing that I 
noticed is that the main tuning and bandspread knobs are both weighted, 
rather heavy and appear to have come from the factory that way. I do not 
have a manual but they are available from several sources on the web. I 
will include a schematic.
http://members.cox.net/radiodx3/nc45rcvr.JPG
http://members.cox.net/radiodx3/nc45rcvr4.JPG
http://members.cox.net/radiodx3/nc45rcvr6.JPG

Kenwood TS-520 Transceiver...............$120 plus shipping
The unit is in very nice shape cosmetically and is compete. The receiver 
works very well but the transmitter is not working. The insides are 
complete and in good condition.
http://members.cox.net/radiodx5/ts520.JPG
http://members.cox.net/radiodx5/ts5204.JPG

Motorola 51X19 Wooden Table Radio-Brown Plaskon Grill...$100 plus shipping
This is a 5 tube radio from 1942. New electrolytics and most of the 
paper capacitors have been replaced. The set plays well. Cosmetically it 
is in in nice shape although their is a small chip out of the top near 
the edge which can be seen in the photo and the plaskon grill has been 
carefully glued where it had cracked.
http://members.cox.net/radiodx5/motorola51x19.JPG
http://members.cox.net/radiodx5/motorola51x194.JPG

Ten-Tec Power Mite PM3 and Matching AC Supply........$200 plus shipping
TenTec Power Mite and Matching AC Supply with instructions and original 
box. This is a late 1960's - early 1970's 2 band QRP transceiver that 
covers 40 and 20 meters, CW only. Output power was measured at a couple 
of watts. The radio works and is in pretty nice shape with a few small 
scratches.
http://members.cox.net/radiodx5/tentec_power_mite.JPG

Harman Kardon A-10 Allegro Vintage Hi-Fi Amplifier....$60 plus shipping
This is a mono unit with a pair of two 12AX7's driving a pair of 6BQ5's. 
The rectifier tube is a 6V4. I powered up the unit and it has bad hum so 
it needs new electrolytic caps. The unit is in nice shape and includes 
the original box but no manual.
http://members.cox.net/radiostuff9/allegro_hk.JPG
http://members.cox.net/radiostuff9/allegro_hk3.JPG

Heathkit IM-10 VTVM..........$20 plus shipping
The unit is working. It does not include test leads. The test lead uses 
a standard 1/4 inch plug which is included and banana plugs which can be 
obtained from Radio Shack.
http://members.cox.net/radiodx3/heathim102.JPG

Big Steel Louvered Cabinet - 19 inch Rack Panel for Homebrew xmtr or 
Linear  Amp.........$50 plus shipping
This enclosure has a hinged top also. The dimensions are 22 inches long 
by 10.5 inches high x 16 inches deep. The size of the front panel that 
will fit this is 19 inches wide by 8.5 inches high. Other than some 
dust, this is in excellent condition and would be a great enclosure for 
a homebrew ham radio transmitter or linear amplifier.
http://members.cox.net/radiodx3/big19inchcabinet.JPG
http://members.cox.net/radiodx3/big19inchcabinet2.JPG
http://members.cox.net/radiodx3/big19inchcabinet3.JPG
http://members.cox.net/radiodx3/big19inchcabinet4.JPG

Steel Project Enclosure for Transmitter or Receiver....$15 plus shipping
A steel box which would make a nice enclosure for a homebrew receiver, 
transmitter or antenna coupler. The dimensions are 15 inches wide by 9 
inches high by 11.5 inches deep. Their are no dents or dings, it just 
needs a cleaning.
http://members.cox.net/radiodx3/box2.JPG

Systron Donner Digital Multimeter Model 7241A (DVM)............$20 plus 
shipping
This unit will measures ac and dc voltage, dc and ac current and 
resistance up to 20 Mohms. This is in nice shape and is working. I 
checked it with a dc power supply and a resistance decade box and the 
readings look good. It also has a tilt up stand. Uses a standard 
computer type power cord which is included.
http://members.cox.net/radiodx5/systron_dvm.JPG
http://members.cox.net/radiodx5/systron_dvm3.JPG

General Electric YGA-4 Audio Oscillator.........$20 plus shipping
This has been tested and is a working unit.
http://members.cox.net/radiodx3/ge_audiogen.JPG
http://members.cox.net/radiodx3/ge_audiogen2.JPG

73 and thanks for looking......Dave
-- 
***********************************************************
Dave  N7RK          Boatanchors Home Page: http://members.cox.net/n7rk
Phoenix, Arizona         *DXCC Honor Roll*    *WAZ#22 - 75 Meter SSB*

ex-XE2/N7RK, N7RK/ZB2, VK2ERK, ZM0AJN, WB6NRK, WN6IWX

Boatanchor and Antique Radio Collector

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/BOATANCHORS.html