Help ID equipment

[howard holden]

The receiver is definitely not an HRO. The guy is tuning a control on the bottom, where the coil rack would be. Also no meter in the upper left, or the big PW dial. However I have no idea what the RX might be. 

The transmitter, besides being a homebrew, could also be a Marine Radio Co transmitter, vintage the 30s.

Howie WB2AWQ
  ----- Original Message ----- 
  From: Joe W1GFH<mailto:WB1GFH at AOL.COM> 
  To: BOATANCHORS at LISTSERV.TEMPE.GOV<mailto:BOATANCHORS at LISTSERV.TEMPE.GOV> 
  Sent: Thursday, March 02, 2006 8:59 PM
  Subject: Re: [BOATANCHORS-TEMPE] Help ID equipment


  In a message dated 3/2/06 5:47:47 PM, kc4yoy at CAROLINA.RR.COM<mailto:kc4yoy at CAROLINA.RR.COM> writes:

  >Any idea what make and model are the large transmitter
  >on the left and the receiver on the desk.

  Looks like a cool black-crackle finish rack and panel homebrew transmitter, 
  and an old HRO receiver.

  -----------------------------------------------------------
  This list is a public service of the City of Tempe, Arizona
  -----------------------------------------------------------

  Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS<http://www.tempe.gov/lists/control.asp?list=BOATANCHORS>
  To post - BOATANCHORS at LISTSERV.TEMPE.GOV<mailto:BOATANCHORS at LISTSERV.TEMPE.GOV>
  Archives - http://listserv.tempe.gov/archives/BOATANCHORS.html<http://listserv.tempegov/archives/BOATANCHORS.html>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/BOATANCHORS.html