Rehab Heathkit MT-1 and RT-1

[john]

Make sure  first, that the filament selection has been checked...they can 
run on either (check the manual) and they're often switched.

Your biggest opportunity is in the power supplies...the little rigs 
themselves may only need cleaning, a lubing of the controls and some DeOxit 
on switch points.

Other than that, they're likely pretty good to go.  Check the filter caps 
in the ps though...if they haven't been replaced, they'll need to be...

John K5MO

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html