DRAKE 2B`

[Bob Hardie- W5UQ]

Gary.... if you ground the MUTE screw... then the "Receive/Send" switch 
will not work.  IF the switch is not working, then the MUTE screw MUST 
be grounded to make the receiver work...... 
I disagree with the below...  I have the manual...  Bob 

Garey Barrell wrote:
> Bob -
>
> Yes, the MUTE line must be grounded.  Ungrounded is Standby.
>
> A copy of the manual is available at <http://bama.edebris.com/manuals/>
>
> 73, Garey - K4OAH
> St Charles, IL
>
> Drake 2-B, 4B & C-Lines, TR-4/C Service Supplement CDs
> <www.k4oah.com>
>
>
>
> Bob Peters wrote:
>> Hi All. I just picked up a 2B and having a problem
>> with the MUTE.. Do the wires go from MUTE to GND??
>> Is it a normal open or normal closed??? Did
>> someone do a scan of the manual??? I would love a
>> copy if that is so..  Thanks all.
>>
>>  
>>
>>  
>>
>> Very Best 73's,
>>
>>  
>>
>> Bob W1PE
>>
>> Mesquite,TX
>>
>>  
>>
>> http://www.w1pe.com
>>
>>  
>>
>>   
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - 
> http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
> To post - BOATANCHORS at LISTS.TEMPE.GOV
> Archives - http://lists.tempe.gov/archives/BOATANCHORS.html
>
> __________ NOD32 3709 (20081220) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html