Recommended PS for Clegg Venus?

[Glen Zook]

The original Heath HP-23 if you need to be able to control the bias voltage.  Otherwise, any of the HP-23 series will produce voltages suitable for the Clegg.  The filament voltage current is going to be on the "ragged edge", but the other voltages will be fine.

You might consider adding an additional filament transformer.

Glen, K9STH

Website:  http://k9sth.com


--- On Thu, 7/3/08, kd4e <doc at KD4E.COM> wrote:

Just acquired a Clegg Venus (new 6M obsession).
 
I didn't realize that it wasn't coming with the power supply.  It did include the manual and the PS cable.
 
What commonly available power supplies out there can provide the following?
 
-80 VDC 10ma
12.6 VAC 6a
280 VDC 130ma
750 VDC 130ma



      

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html