viking valiant

[Al Parker]

Hi Jack,
    If those are small steel L's they may be the ones that fit just behind 
the front panel, supporting the bushings for the 2 shafts for tuning 
"exciter" and "final" caps.  Up clsoe to the VFO box.
73,
Al, W8UT
New Bern, NC
www.boatanchors.org
www.hammarlund.info

"there is nothing -absolutely nothing- half as much worth doing as simply 
messing about in boats."
   Ratty, to Mole


----- Original Message ----- 
From: "Jack Schrader" <w1jhs at VERIZON.NET>
To: <BOATANCHORS at LISTS.TEMPE.GOV>
Sent: Wednesday, July 23, 2008 8:56 PM
Subject: [BOATANCHORS-TEMPE] viking valiant


Just about got my newly aquired back together but #1 I've got two small 'L' 
shaped brackets that I don't remember where they go. The long side has about 
1/4" hole in it and the longer side has about a 1/16" hole in it. Can 
someone tell me where they go?

Question #2 is about the brass fixture that is on the vfo shaft and how fo I 
set the dial pointer. Is this brass piece some sort of gear reduction.

Tnx & 73

Jack

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - 
http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html