HQ-100 dial cord diagram

[George Maier]

Emil:

Hammarlund, almost universally used pinch drives, not dial strings.  The
shaft behind the tuning knob is directly coupled to the outer rim of the
dial with a pinch roller. The center hub of the dial is on the main shaft of
the variable capacitor. All very simple and reliable.  Hallicrafters, on the
other hand.........well, you know!

73 & enjoy the HQ-100, it's a very under rated receiver.

George - W1LSB


-----Original Message-----
From: Boat Anchor Owners and Collectors List
[mailto:BOATANCHORS at LISTS.TEMPE.GOV] On Behalf Of Emil Dular
Sent: Friday, August 21, 2009 1:52 PM
To: BOATANCHORS at LISTS.TEMPE.GOV
Subject: HQ-100 dial cord diagram

Just stumbled across a very clean HQ-100. Downloaded the BAMA manual and it
tells me everything I want to know except there is no diagram for stringing
the dial cords.

Anyone have one or is it so obvious none is needed?

Emil
WD4SCZ.

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control -
http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html