Modulation impact when amplifying a DSB signal?

[kd4e]

Simple = grids & screens push-pull, plates parallel.

Perhaps using a single dual pentode tube, 6AR11.


>> I am thinking of this in terms of a QRP DSB exciter using low plate
>> voltage (125v) versus having to manage modulation at a higher power stage.
>>     
>
> I'm a bit confused here.  Generating clean DSB with suppressed
> carrier requires a fair amount of circuitry.  If you really want
> AM (DSB plus carrier), why not modulate at the milliwatt level
> with something like a cathode modulator or the output-transformer
> scheme used in Clegg 22ers and follow it with class-A linear
> stages up to the 5-watt level.
>
> Jim Bromley, K7JEB
>   

-- 

Thanks! & 73, doc, KD4E
FS/Swap/Wanted: http://kd4e.com/swapn.html
Free OS : http://www.PuppyLinux.com
Personal: http://kd4e.com
            |_|___|_|
            | | & | |
       /\      {|
      /  \     {|
     /    \    {|
    /   @  \   {|
    |   |~_|~~~~|
    |   -| |    |
============\ # KD4E
Have an http://ultrafidian.com day!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html