Hickok Tube Tester

[Scott Johnson]

Rick-
The Beltron sockets that AES sells are the most rugged sockets I have seen
to datem I would replace you sockets with these, and then put in socket
savers as well, perhaps made with the beltron sockets.

Scott, W7SVJ
-----Original Message-----
From: Boat Anchor Owners and Collectors List
[mailto:BOATANCHORS at LISTS.TEMPE.GOV] On Behalf Of rick darwicki
Sent: Sunday, February 07, 2010 3:50 PM
To: BOATANCHORS at LISTS.TEMPE.GOV
Subject: [BOATANCHORS-TEMPE] Hickok Tube Tester


Hi All,

I have about 8 milk crates full of tubes to test and my 8 pin octal is
getting flaky. The 7 and 9 pin socket savers are getting flaky too.

I would like to replace the black 8-pin with under chassis ring mount and
the under chassis screw mount 7 and 9 pin sockets.

Any recommendations/sources for high quality sockets that can withstand a
lot of use?

Rick, N6PE

===============================================================

Remember, Some things are not worth doing well

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control -
http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html