[Boatanchors] #44/47 Buld replacement with LEDs

[Wilson Lamb]

Aren't these 6V lamps?  How could you connect one across 17.5V of filament??
Wilson
W4BOH
----- Original Message ----- 
From: "Walter - K5EST" <walter.k5est at gmail.com>
To: "BoatAnchors" <boatanchors at puck.nether.net>
Sent: Friday, February 04, 2011 8:19 PM
Subject: Re: [Boatanchors] #44/47 Buld replacement with LEDs


> Great question......thanks, Mike!
> 73....Walter - K5EST - Missouri
>
>
> On Thu, Feb 3, 2011 at 7:39 PM, Michael A. Bittner <mmab at cox.net> wrote:
>> How would these work in an AA5 radio where the #47 bulb is often 
>> connected
>> across one half of the rectifier heater? Rectifiers are typically 35Z5 or
>> 35W4 with center-tapped heater. Mike W6MAB
>
> _______________________________________________
> Boatanchors mailing list
> Boatanchors at puck.nether.net
> https://puck.nether.net/mailman/listinfo/boatanchors
>