[Boatanchors] Metal cabinet BAs
ckepus at comcast.net
Wed Jun 15 16:18:42 EDT 2011
Also the NC-183. My radio's cabinet also had the engraved lettering. The
NC-183D lettering was silk screened or painted on the surface of the panel.
From: boatanchors-bounces at puck.nether.net
[mailto:boatanchors-bounces at puck.nether.net] On Behalf Of Glen Zook
Sent: Wednesday, June 15, 2011 12:07 PM
To: Boatanchors at puck.nether.net; Bob Jackson
Subject: Re: [Boatanchors] Metal cabinet BAs
--- On Tue, 6/14/11, Bob Jackson <bob.ag5x at yahoo.com> wrote:
From: Bob Jackson <bob.ag5x at yahoo.com>
Subject: [Boatanchors] Metal cabinet BAs
To: "Boatanchors at puck.nether.net" <Boatanchors at puck.nether.net>
Date: Tuesday, June 14, 2011, 5:58 PM
I'd like to try re-furbing metal BA cabinets that have their lettering in
relief so I can use the lacquer sticks I've heard about. Any suggestions on
a good starting place, i.e. make/model?
-----Inline Attachment Follows-----
Boatanchors mailing list
Boatanchors at puck.nether.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Boatanchors