[Boatanchors] Need a relay for an Eico tube-type AM/CW/SSB transceiver model 753

[Glen Zook]

How many poles?

I have some P&B relays that are 4PDT and a coil voltage of 120 VAC.  However, the coil resistance is only 4K.  You might be able to put a resistor in series with the coil if there are enough contacts.
 
Glen, K9STH


Website:  http://k9sth.com


________________________________
From: Mike Langner <mlangner at swcp.com>
To: boatanchors at puck.nether.net
Sent: Wednesday, October 5, 2011 7:47 PM
Subject: [Boatanchors] Need a relay for an Eico tube-type AM/CW/SSB transceiver model 753

Hello everyone !

I'm doing my best to repair/restore and old tube-type Eico 753 AM/CW/SSB
three-band transceiver.

The T/R relay is broken.

Broken?  Yep!  Someone actually broke the black plastic base that the
contacts to through to the solder lugs/socket pins.  Broken in half.  And
presumably that same person tried with no success to glue it back together.

I'd like very much to purchase a replacement.  It's an Allied Control model
T154-CCC-CCC rated 115 VDC [yes, DC], 9,000 ohms, with contacts rated at 2
amps.

The number 6611W also appears on the dust cover.

If you might have a cross to an R10 number, that would be great - I haven't
had any luck with any cross including NTE.

Many, many help for any help you might provide!

Mike/
K5MGR
__________________________________________________





Mike Langner
929 Alameda Road NW
Albuquerque, NM 87114-1901



(505) 898-3212 home/home office
(505) 238-8810 cell
mlangner at swcp.com



_______________________________________________
Boatanchors mailing list
Boatanchors at puck.nether.net
https://puck.nether.net/mailman/listinfo/boatanchors