[Boatanchors] HV Wire Source
w2iy at verizon.net
Mon Oct 8 22:38:08 EDT 2012
Thanks to all who replied, I have several good sources for HV wire,
including the old trick of using RG-8. Great bunch of guys (and gals) on
this list, thank you!
From: boatanchors-bounces at puck.nether.net
[mailto:boatanchors-bounces at puck.nether.net] On Behalf Of Max Rosan
Sent: Monday, October 08, 2012 6:40 PM
To: boatanchors at puck.nether.net
Subject: Re: [Boatanchors] HV Wire Source
I have used high-performance automotive spark plug wire for HV power
supplies. Just make sure it is copper wire, not "resistance wire". I prefer
the 8mm silicone jacketed wire made by Mallory, which has red insulation, or
Accel, which is yellow. You may have to look a little to find an automotive
electrical place that will sell you bulk wire for the length you need.
Otherwise you'd need to buy a 100' roll.
73 DE KJ6HN
On Oct 8, 2012, at 12:00 PM, Michael Tortorella <w2iy at verizon.net> wrote:
> PS - does anyone know where I could get maybe 6-10 feet of some HV
> wire? I am going to have to build a separate PS for this beast and would
> like to do a proper job with the plate voltage.
Boatanchors mailing list
Boatanchors at puck.nether.net
More information about the Boatanchors