[Boatanchors] Speaking of tube checkers ...

[Michael Tauson]

The older versions of the Jackson 648 had provisions for acorns & wire lead
tubes.

Best regards,
 
Michael, K3MXO, A&P 1803851 Ph: 1-866-733-0218
The ‘Torque ‘er down 'till it strips then back ‘er off a quarter turn’ type
of expert
http://www.nationalmssociety.org/chapters/NTH/index.aspx
http://wh7hg.blogspot.com/
http://kludges-other-blog.blogspot.com
Hiki Nô! 

-----Original Message-----
From: boatanchors-bounces at puck.nether.net
[mailto:boatanchors-bounces at puck.nether.net] On Behalf Of qrv at kd4e.com
Sent: Sunday, 07 April, 2013 10:55
To: BoatAnchors
Subject: Re: [Boatanchors] Speaking of tube checkers ...

Is there a known source of an acorn tube adapter or need I scour
the Fests?

"The 954, 955, and 956 were repackaged in miniature form as the 9001,
9002, and 9003 respectively. This should be useful to anyone who wants
to build a socket adapter to test acorns, and who needs the settings for
the tester: just use the test data for bias and plate load from the
corresponding 900x tube."



-- 

Thanks! & 73, KD4E.com
David Colburn nevils-station.com
I don't google I SEARCH! duckduckgo.com
Network: groups.yahoo.com/group/qrv
Restored to design-spec at Heaven's gate 1Cor15:22
_______________________________________________
Boatanchors mailing list
Boatanchors at puck.nether.net
https://puck.nether.net/mailman/listinfo/boatanchors