[Boatanchors] Dayton Hamvention list

[pmarkavage at juno.com]

Here's a link that lists all vendors that have signed up for flea market
spots and indoor spots:
Cut and paste to browser; watch for wrap-around to second line:
http://www.pcboard.ca/hamvention2013/

Pete, wa2cwa

On Mon, 13 May 2013 03:34:53 +0000 "Fuqua, Bill L" <wlfuqu00 at uky.edu>
writes:
>   I have received few replies from the three list I have 
> contacted about making up a list. I will still send the list.
> I will send the info to all three list, AMPS, Boatanchors and Test 
> Equipment.
> 73
> Bill wa4lav
> 
> ________________________________________
> From: Fuqua, Bill L
> Sent: Wednesday, May 08, 2013 2:37 PM
> 
>   Anyone interested in compiling a list of members and contact 
> information (at hamvention) going to Dayton.
> I will be there in space 2905 outside. I also have some interesting 
> crystal calibrator kits that I will be taking.
> They are solid state and use TCXO and produce good harmonic spectra 
> beyond 2 Meters even when set to
> 10kHz fundamental by generating  5ns pulses.
>  Now putting together a list of stuff to take.test equipment, 
> boatanchors, amplifier parts and non-boatanchor.
> I need to thin out my collection. Need to come back with less stuff 
> than I take.
>   I also hope to bring my portable transmitting tube tester, some of 
> you may have seen it before. Have to
> repair the grid pulser. Can check a  number of tubes up to 1.5kW 
> plate dissipation.
> 
> 73
> Bill wa4lav