[Boatanchors] WTD Hammarlund HX-50 160M Add On Kit, Parts Or Ideas

[qrv at kd4e.com]

Very detailed HX-50 restoration page here:
http://ppinyot.com/H/hammarlund.htm

He doesn't mention 160m but you might ask ...

I don't know if I've ever seen a HX-50 in the flesh - perhaps
at a Fest & thought it was, at a distance, a receiver.

David KD4E

> I know this is a long shot but I'm going to give it a try.
> 
> The Hammarlund HX-50 Transmitter has 160 on it's VFO. However 160 was an
> option that could be installed when new, or added on. I wonder if anyone has
> either the add on kit, or possibly a junker with the needed parts
> There are 3 coils located over the band switch 
> 
> T10001- 1st mixer coil p/n P26786-21
> T1002- Second mixer coil p/n P26786-18
> T1003 Driver Coil  p/n P26786-19
> 
> 11.335 mc crystal
> 
> I have also attached the Hammarlund directions, courtesy of BAMA on how to
> install the kit.
> 
> Any ideas or thoughts would be appreciated
> Thanks
> Carl Nord
> WA1KPD



-- 

*David*
~KD4E~
Nevils, Georgia USA

Safe & Secure Search Engine: duckduckgo.com

Android for Hams: groups.yahoo.com/group/hamdroid
Creative Tech: groups.yahoo.com/group/ham-macguyver
Raspi Alternative: groups.yahoo.com/group/beagleboneblack/

Restored to design-spec at Heaven's gate 1Cor15:22