[Boatanchors] 2nd Newbie Q Follow Up
bcarling at cfl.rr.com
Wed Sep 10 13:09:48 EDT 2014
I still don't know what devices you're trying to connect together. However most devices I have used do not have any difficulty with this arrangement and grounding the Shields at both ends.
Best regards - Brian Carling
AF4K Crystals Co.
117 Sterling Pine St.
Sanford, FL 32773
Tel: +USA 321-262-5471
> On Sep 10, 2014, at 12:15 PM, "Bob Jackson" <bob145 at suddenlink.net> wrote:
> Ah, Ha! You've hit on the issue!
> I'm trying to convert the stereo audio output from a 1/8" jack (e.g. iPod) to two RCA plugs to go into a switchbox. On the surface, it would seem that the shield should be the common connection between the two RCA plugs. Using the shield and one signal wire for one plug is OK but when I go to the second signal wire, I find that it's actually common to the shield itself. It doesn't seem right to leave the shield unconnected at this second plug but to connect it would seem to mean that now the two signal wires are shorted together. What's the story here?
> Bob AG5X
> ----- Original Message ----- From: "Brian Carling" <bcarling at cfl.rr.com>
> To: "Bob Jackson" <bob145 at suddenlink.net>
> Cc: "porch.boat" <boatanchors at theporch.com>; "puck.boat" <boatanchors at puck.nether.net>; "qth.boat" <boatanchors at mailman.qth.net>
> Sent: Wednesday, September 10, 2014 10:49 AM
> Subject: Re: [Boatanchors] 2nd Newbie Q
> What two devices are you connecting?
> Best regards - Brian Carling
> AF4K Crystals Co.
> 117 Sterling Pine St.
> Sanford, FL 32773
> Tel: +USA 321-262-5471
>> On Sep 10, 2014, at 11:29 AM, "Bob Jackson" <bob145 at suddenlink.net> wrote:
>> I've noticed that some construction articles involving the use of shielded cables advise that the shield be connected at only one end but they don't say which end, i.e. near or far. Also, when is this practice most useful and why?
>> Thanks again,
>> Bob AG5X
>> Boatanchors mailing list
>> Boatanchors at puck.nether.net
More information about the Boatanchors