[Boatanchors] Signal Shifter Coil Forms

[Wilson Lamb]

I’m not bailed out of my hasty purchase yet, but there’s been great progress!
After filling several requests, I’m down to a BUNCH of six pin coil forms for stripping/reuse.
They are about 1.25X2” and many are for low frequencies, so one could actually strip down to a desired inductance, with a little calculation, or just start over.
So all you need are some six pin sockets!  If you really need coils, it might be worth it to buy some of the ebay sockets http://www.ebay.com/itm/1PC-310-6E5-UX6-42-366-6Pin-Ceramic-Vacuum-Tube-Socket-Valve-Base-DIY-Audio-AMP/191603607226?_trksid=p2045573.c100508.m3226&_trkparms=aid%3D555017%26algo%3DPL.CASSINI%26ao%3D1%26asc%3D38530%26meid%3D32e41f81bc1d4e3692ec2ae862b47f15%26pid%3D100508%26rk%3D1%26rkt%3D1%26  to use with these.  That’s still less than many forms cost!
$2 each, plus post.
73,
WL