[Boatanchors] Article on changing from 2 to 3 wire power cords

wb3fau55 at neo.rr.com wb3fau55 at neo.rr.com
Tue Aug 6 17:50:53 EDT 2019



	MOVs have tendancy to blow up. i wont use them. Russ wb3fauFrom:
"Maury Guzick" 
To: "Boatanchors Reflector", "Glen Zook"
Cc: 
Sent: Tuesday August 6 2019 5:33:14PM
Subject: Re: [Boatanchors] Article on changing from 2 to 3 wire power
cords

 Hi Glenn, 

 Long time. 

 Yea, it's the tricky AC/DC I am concerned about. 

 What about using MOV's, thought I read something about them not being
recommended to use anymore in boatanchors?
 MauryW5IO
 On Tuesday, August 6, 2019, 4:28:46 PM CDT, Glen Zook  wrote: 

 I don't know of any article on doing this. However, it is a very
simple thing to do.
 Black wire goes first to the fuse and then to the off / on switch. If
no fuse, add one!
 White wire goes to unfused side of the power transformer. If there is
a fuse, it should be rewired in the black lead. If 2-fuses, remove
this one.
 Green wire goes directly to the chassis.
 Of course, this is with transformer powered units.
 If AC / DC, then things get "tricky" depending on if one side of the
AC line cord is connected to the chassis.
 Glen, K9STH 
 Website: https://k9sth.net [1] 

 On Tuesday, August 6, 2019, 04:19:26 PM CDT, Maury Guzick  wrote: 

 I have read a couple of different ones in the past, but can't seem to
find any on data base searches. 

 Does anyone have a reference for this?

 _______________________________________________
 Boatanchors mailing list
 Boatanchors at puck.nether.net
 

Links:
------
[1] https://k9sth.net



More information about the Boatanchors mailing list