[Boatanchors] Another question from my son...

[William Morton]

Hello All,

This one is beyond my ken.

Refer to the drawing found here:  https://www.dropbox.com/s/mm2ufyew8sy7x72/Screenshot%202022-05-23%207.02.30%20PM.png?dl=0
[https://www.dropbox.com/temp_thumb_from_token/s/mm2ufyew8sy7x72?preserve_transparency=False&size=1200x1200&size_mode=4]<https://www.dropbox.com/s/mm2ufyew8sy7x72/Screenshot%202022-05-23%207.02.30%20PM.png?dl=0>
Screenshot 2022-05-23 7.02.30 PM.png<https://www.dropbox.com/s/mm2ufyew8sy7x72/Screenshot%202022-05-23%207.02.30%20PM.png?dl=0>
Shared with Dropbox
www.dropbox.com
Here is his question, copied directly from his email:

Will this current mockup work (theoretically), or would I have to ground grid 1 and insert a filament choke, etc. to use a pi output network?

Thanks in advance.

Best Regards,

William

p.s.  Yes, I will add him to the Boatanchor list...  🙂