<HTML>
<BODY BGCOLOR="#FFF8E0">
Floyd:
<BR>They were both identical in that respect.  There was a 60's article
around that showed how to home brew 160M coils for the 100/200V by the
well know DX'er KH6IJ.  Maybe some one has this and can send you a
copy.   I's don't know of any 100's or 200's  that had factory
coils, but could have been some.  I've got both here, and the 200V
is actually a bit easier to operate, but the 100V has a few more bells
& whistles.  No matter, they're both beter than any other SSB
exciter ever made, bar none.
<BR>73's
<BR>George Maier - K1GXT
<BR> 

<P>Floyd Sense wrote:
<BLOCKQUOTE TYPE=CITE> <FONT COLOR="#000000"><FONT SIZE=-1>I've not
been able to locate a 100V, so will likely buy a 200V that's available. 
The 200V did not come stock with the 160M couplers installed, but I understand
that there's a spare position on the bandswitch and that the coupler(s)
can be installed in that position.  Can any 200V owner verify that
is indeed the case?  If the coupler could be located, can 160 coverage
be added by just installing the coupler or are there other changes to be
made?  Does the 200V manual cover the installation?</FONT></FONT> <FONT SIZE=-1>K8AC</FONT><FONT COLOR="#000000"><FONT SIZE=-1>Floyd
Sense in Angier, NC</FONT></FONT></BLOCKQUOTE>
 
</BODY>
</HTML>