[calix-nsp] 1550nm video overlay power.

[Matt McAdory]

Those legacy ONT are referred to as in the 700C in Product Literature
Datasheets for the P-Series.

-5 dBm to 2 dBm is the operating range for 1550nm.

Matt


On Thu, Apr 19, 2012 at 3:35 PM, Roberto Nanclares
<r.nanclares at gmail.com> wrote:
> Hi LIST,
>
> I am trying to setup RF video on a Calix 720 ONT and the signal in the
> RF port is showing up and then dissapear.
>
> Can somebody tell me the required power level of the 1550nm signal on
> the 720 ONT to make it work properly? I can't find the datasheet with
> the specs for this ONT. This is being done in a lab enviroment.
>
> Thanks a lot in advance.
> _______________________________________________
> calix-nsp mailing list
> calix-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/calix-nsp