[cisco-bba] ATM MIB

Tassos Chatzithomaoglou achatz at forthnet.gr
Fri Nov 28 10:04:50 EST 2003


I believe your "%slot%" refers to the ifindex value.

Do you know if these oids include atm overhead or are they just ip?

Sebastian Dehne wrote:

> Thomas Bridge (thomas at wibble.to) wrote:
> 
>>Is there an ATM MIB variable that will reflect the amount
>>of traffic sent and received on each virtual path  on an
>>ATM interface?
> 
> 
> Yes, check out: 
> 
> 1.3.6.1.4.1.9.9.66.1.1.1.1.1.%slot%.%vci%.%vpi% => InPkts
> 1.3.6.1.4.1.9.9.66.1.1.1.1.2.%slot%.%vci%.%vpi% => OutPkts
> 1.3.6.1.4.1.9.9.66.1.1.1.1.3.%slot%.%vci%.%vpi% => InOctets
> 1.3.6.1.4.1.9.9.66.1.1.1.1.4.%slot%.%vci%.%vpi% => OutOctets
> 
> For me, slot 21 works. I couldn't work out why it is '21', and not the
> interface number 1. Guess you have to play a bit with that.
> 
> Hope it helps.
> 
> Sebastian
> 
> 
>>I'm not that interested in traffic on a per VC basis,
>>
>>Thanks,
>>
>>Thomas
>>
>>
>>
>>
>>_______________________________________________
>>cisco-bba mailing list
>>cisco-bba at puck.nether.net
>>https://puck.nether.net/mailman/listinfo/cisco-bba
>>
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-bba mailing list
> cisco-bba at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-bba

-- 
***************************************
       Chatzithomaoglou Anastasios
Network Design & Development Department
              FORTHnet S.A.
          <achatz at forthnet.gr>
***************************************



More information about the cisco-bba mailing list