[cisco-bba] debug vpdn event on NAS 5300 (12.3) vs 12.2

[adama.faye at bell.ca]

Hi all,


Debug vpdn event output does not give the same output on AS5300 12.3
than As5300 12.2. Is it a bug or not ? 

12.3 

AS5300#
Jul  2 08:16:09: As2/06 Tnl/Sn 24203/6767 L2TP: VPDN session up


12.2 

As5300#
Jul  2 08:19:36: %DIALER-6-BIND: Interface As99 bound to profile Di1
Jul  2 08:19:36: As99 VPDN: Got DNIS string 5146364399
Jul  2 08:19:36: As99 VPDN: Looking for tunnel -- nss0 --
Jul  2 08:19:36: As99 VPDN/RPMS/: Got tunnel info for vpnss0
Jul  2 08:19:36: As99 VPDN/RPMS/:   LAC NSS0
Jul  2 08:19:36: As99 VPDN/RPMS/:   l2tp-busy-disconnect yes
Jul  2 08:19:36: As99 VPDN/RPMS/:   l2tp-tunnel-password xxxxxx
Jul  2 08:19:36: As99 VPDN/RPMS/:   IP 11.11.11.1
Jul  2 08:19:36: As99 VPDN/: curlvl 1 Address 0: 11.11.11.1,    priority
1 
Jul  2 08:19:36: As99 VPDN/: Select non-active address 11.11.11.1,
priority 1
Jul  2 08:19:36: As99 VPDN: Find LNS process created
Jul  2 08:19:36: As99 VPDN: Forward to address 11.11.11.1
Jul  2 08:19:36: As99 VPDN: Pending
Jul  2 08:19:36: As99 VPDN: Process created
Jul  2 08:19:36: As99 VPDN: Forwarding...
Jul  2 08:19:36: As99 VPDN: Bind interface direction=1
Jul  2 08:19:36: As99 VPDN: e5930 at nss0 is forwarded
Jul  2 08:19:37: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Async99, changed state to up

 ---

How can I get the same information with 12.3 ..

Thanks for your helps.