[cisco-bba] FW: Cisco Avpair ACL
Paul Horrocks (phorrock)
phorrock at cisco.com
Tue May 4 10:46:00 EDT 2004
Hello
Please see:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/
secur_c/scprt6/scdradat.htm
With the following user profile on radius:
test at LNStest.com Password = "cisco"
Service-Type = Framed,
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.254,
Filter-Id = 101.in
And the below cfg on the LNS:
access-list 101 permit ip any any
The user test at LNStest.com will have access list is 101 applied inbound.
Regards
Paul.
>-----Original Message-----
>From: cisco-bba-bounces at puck.nether.net
>[mailto:cisco-bba-bounces at puck.nether.net] On Behalf Of
>adama.faye at bell.ca
>Sent: 04 May 2004 14:32
>To: cisco-bba at puck.nether.net
>Subject: [cisco-bba] FW: Cisco Avpair ACL
>
>
>
>Hi all
>
>Is there a way to push an ACL from a Radius by giving only the name or
>the number of the ACL that LNS have to use.
>I want to create the ACL on the LNS, and use the Radius to tell the LNS
>the ACL to be used for a specific user.
>
>
>Thanks.
>
>
>
>
>
>
>
>_______________________________________________
>cisco-bba mailing list
>cisco-bba at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-bba
>
More information about the cisco-bba
mailing list