[cisco-bba] Accounting gigawords

Jason Lixfeld jason at lixfeld.ca
Sat Jul 30 19:59:13 EDT 2005


I seem to remember Giga-Words only appears in accounting records if  
the Input/Output-Octets counter rolls over.  IIRC, Gigawords is just  
a counter that tells you how many times the regular in/out-octet  
counter has rolled.

On 28-Jul-05, at 7:28 AM, Imad Buhidma wrote:

> Hello
>
> We have Cisco 7206VXR (NPE-G1) processor with IOS image c7200-js-mz. 
> 123-8.T3 ,I have configured the router to send
> "Acct-Input-Giga-Words" attribute with "aaa accounting gigawords"  
> command but when i issued "debug radius accounting" command i could  
> not find anything related to "Acct-Input-Giga-Words" in debugging,  
> here is some of debugging results :
>
> Jul 25 13:57:40.688: RADIUS:  Acct-Session-Id     [44]  10  "00000025"
> Jul 25 13:57:40.688: RADIUS:  Vendor, Cisco       [26]  41
> Jul 25 13:57:40.688: RADIUS:   Cisco AVpair       [1]   35  "client- 
> mac-address=0060.4c3c.cde5"
> Jul 25 13:57:40.688: RADIUS:  Framed-Protocol     [7]   6    
> PPP                       [1]
> Jul 25 13:57:40.688: RADIUS:  Framed-IP-Address   [8]   6   172.16.0.1
> Jul 25 13:57:40.688: RADIUS:  Vendor, Cisco       [26]  35
> Jul 25 13:57:40.688: RADIUS:   Cisco AVpair       [1]   29   
> "connect-progress=LAN Ses Up"
> Jul 25 13:57:40.688: RADIUS:  Acct-Session-Time   [46]  6   1298
> Jul 25 13:57:40.688: RADIUS:  Acct-Input-Octets   [42]  6   443124
> Jul 25 13:57:40.688: RADIUS:  Acct-Output-Octets  [43]  6   5174679
> Jul 25 13:57:40.688: RADIUS:  Acct-Input-Packets  [47]  6   3779
> Jul 25 13:57:40.688: RADIUS:  Acct-Output-Packets [48]  6   4862
> Jul 25 13:57:40.688: RADIUS:  Acct-Authentic      [45]  6    
> RADIUS                    [1]
> Jul 25 13:57:40.688: RADIUS:  User-Name           [1]   11  "imad"
> Jul 25 13:57:40.688: RADIUS:  Acct-Status-Type    [40]  6    
> Watchdog                  [3]
> Jul 25 13:57:40.688: RADIUS:  NAS-Port-Type       [61]  6    
> Virtual                   [5]
> Jul 25 13:57:40.688: RADIUS:  Vendor, Cisco       [26]  19
> Jul 25 13:57:40.688: RADIUS:   cisco-nas-port     [2]   13   
> "1/0/0/10.41"
> Jul 25 13:57:40.688: RADIUS:  NAS-Port            [5]   6   0
> Jul 25 13:57:40.688: RADIUS:  Class               [25]  74
>
> all the debgging results are like this,there's nothing related to  
> "Acct-Input-Giga-Words" attribute even when i clear all sessions.
>
> What soulid i do to make the router send "Acct-Input-Giga-Words"  
> attribute and how i can check if the router send the attribute  
> using debugging ?
>
>
> Imad Buhidma
> Best Regards.
>
>
>
>
>
> _______________________________________________
> cisco-bba mailing list
> cisco-bba at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-bba
>
>



More information about the cisco-bba mailing list