[cisco-bba] RE: [c-nsp] Static ip address info

Mark Tohill Mark at u.tv
Wed Nov 16 07:27:11 EST 2005


Thanks Oli for that.

Does anyone know the 'minimal' for Netflow re: monitoring applications
etc.?

Mark

-----Original Message-----
From: Oliver Boehmer (oboehmer) [mailto:oboehmer at cisco.com] 
Sent: 16 November 2005 11:34
To: Mark Tohill; cisco-nsp at puck.nether.net
Cc: cisco-bba at puck.nether.net
Subject: RE: [c-nsp] Static ip address info

Mark Tohill <> wrote on Wednesday, November 16, 2005 12:20 PM:

> I sent this originally to BBA List. Hope I'm not off-topic.

Cc'ing bba list 
>
> We have DSL users coming in on 7204VXR's over L2TP VPDN acquiring
> static IP's, both gateways and small subnets (/29's for example).
> 
> We suspect a lot of our users are not using their /29's and are
> NAT'ing etc. on their gateway addresses.
> 
> Is there any relatively easy way of finding out this sort of
> information?
> 
> Ideas spring to mind are ACL's, gleaning info from CEF (???), ip
> accounting....
>
> Has anyone ever come up against same problem or has an idea how this
> might work?

What are your objectives? To find out if your product is actually used
the way it is intended to, or if you might as well offer fixed /32
addresses only since most of the customers use NAT anyway?

CEF installs a /29 prefix and doesn't care or tell which addresses out
of this network has been used. IP accounting is a way, but it is
expensive. I would investigate Netflow (possibly sampled) and work from
there..

	oli



More information about the cisco-bba mailing list