[cisco-bba] QoS PPPoA vs PPPoE
Christoph Loibl
cl at sil.at
Fri Dec 1 15:02:43 EST 2006
Hi!
Has anyone of you configured CBWFQ and LLQ on MLPPP and dialer
interfaces which run PPPOE over an ATM-VPC interface (only client
output side is my concern).
Cisco has a nice documentation about PPPOA, but it seems that PPPOE
is not supported the same way:
http://www.cisco.com/warp/public/105/cbwfqdialer.html
I configured the interface like this...
interface ATM0.38 point-to-point
bandwidth 500
no snmp trap link-status
pvc sil 0/38
vbr-nrt 500 500
encapsulation aal5snap
service-policy output ATMOUT
pppoe-client dial-pool-number 1
!
end
Applying a service policy containing policer for the interface does
not result in the traffic beeing policed. Probably all these fancy
QoS things are not supported when using pppoe?
Regards
Christoph
--
SILVER SERVER \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ \\\\\\ \\ \
Ing Christoph Loibl <cl at sil.at> Senior Network Engineer
CL8-RIPE http://www.sil.at, http://pix.tix.at
More information about the cisco-bba
mailing list