[cisco-bba] L2TP LNS and HSRP

[Gaurav Sabharwal]

on 12/29/2006 09:53 PM Oliver Boehmer (oboehmer) said the following:
> cisco-bba-bounces at puck.nether.net <> wrote on :
> 
>> Hi,
>>
>> I am trying to bring up two Cisco 7206 routers as LNS for L2TP dial.
>> IOS: 12.2(28)SB5. HSRP is configured on the router's outside interface
>> in order to provide redundancy.
>>
> 
> You can't terminate the L2TP tunnel on the HSRP address, please use
> multiple IP addresses at the LAC (i.e. multiple initiate-to statements)
> to provide redundancy/fail-over to both LNS 

Thanks for the reply. We are going to use client initiated L2TP and we 
can't provide multiple LNS via the pseudowire command on the CPE.

Also, why is not possible to use the HSRP to terminate L2TP tunnels?

- Gaurav