[cisco-bba] NPE-G2?
Tassos Chatzithomaoglou
achatz at forthnet.gr
Tue May 9 02:20:21 EDT 2006
Hi Prem,
Prem Anand (hprem) wrote on 9/5/2006 8:27:
> Hi Mark,
> NPE-G2 supports the same broadband features that are supported
> on a NPE-G1. Non-broadband, performance should be twice that of an
> NPE-G1 and broadband performance should be slightly less than that.
>
> Unfortunately, as Stephen stated MPF support with NPE-G1 is
> stopped and no MPF images will be released.
Was there a specific reason for deciding that one?
--
Tassos
> NPE-G2 doesn't support MPF.
>
> Both G1 and G2 supports 16K Sessions (without any other
> performance limiting features)
>
> Regards
> Prem
>
>> -----Original Message-----
>> From: cisco-bba-bounces at puck.nether.net
>> [mailto:cisco-bba-bounces at puck.nether.net] On Behalf Of Stephen Fulton
>> Sent: Friday, May 05, 2006 6:11 PM
>> To: cisco-bba at puck.nether.net
>> Subject: Re: [cisco-bba] NPE-G2?
>>
>> Mark wrote:
>>
>> > I know that NPG-G2 is single core powerpc based and not
>> multicore MIPS > based...maybe i can expect better
>> performance with NPE-G1 with MFP
>>
>> There is a thread on cisco-nsp (see "MPF (was : NPE-G1
>> throughput, with and without L2TP)") discussing MFP - and
>> perhaps I've misunderstood, but it appears MFP support will
>> be dropped after 12.4(4)T, except for bug fixes to existing versions.
>>
>> The specs on the NPE-G2, as far as BBA is concerned, suggest
>> aggregation of up to 16k. In the real world, that likely
>> means half. But we won't know for certain until the first
>> deployments report back.
>>
>> -- Stephen.
>>
>>
>>
>>> Hi all!
>>>
>>> what change in the broadband aggregation with the
>> itrodutions of 7200
>>> NPE-G2?
>>>
>>> We can expect to have better performance or more user
>> aggregated per
>>> box upgrading to this new NPE over NPE-G1? Some one has
>> news about this?
>>> Cisco web site is not referring to anything inew with this release.
>>>
>>> I know that NPG-G2 is single core powerpc based and not
>> multicore MIPS
>>> based...maybe i can expect better performance with NPE-G1
>> with MFP IOS
>>> :-)
>>>
>>> mark
>>> _______________________________________________
>>> cisco-bba mailing list
>>> cisco-bba at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-bba
>> _______________________________________________
>> cisco-bba mailing list
>> cisco-bba at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-bba
>>
>
> _______________________________________________
> cisco-bba mailing list
> cisco-bba at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-bba
>
More information about the cisco-bba
mailing list