[cisco-bba] NPE-G2?

[Prem Anand (hprem)]

> -----Original Message-----
> From: Tassos Chatzithomaoglou [mailto:achatz at forthnet.gr] 
> Sent: Tuesday, May 09, 2006 11:50 AM
> To: Prem Anand (hprem)
> Cc: Stephen Fulton; cisco-bba at puck.nether.net; Mark
> Subject: Re: [cisco-bba] NPE-G2?
> 
> Hi Prem,
> 
> Prem Anand (hprem) wrote on 9/5/2006 8:27:
> > Hi Mark,
> > 	NPE-G2 supports the same broadband features that are 
> supported on a 
> > NPE-G1. Non-broadband, performance should be twice that of an
> > NPE-G1 and broadband performance should be slightly less than that.
> > 
> > 	Unfortunately, as Stephen stated MPF support with 
> NPE-G1 is stopped 
> > and no MPF images will be released.
> 
> 
> Was there a specific reason for deciding that one?

No obvious reasons; May be b'cos MPF supported only BBA and not any
other features

Prem

> 
> --
> Tassos
> 
> > 	NPE-G2 doesn't support MPF.
> > 
> > 	Both G1 and G2 supports 16K Sessions (without any other 
> performance 
> > limiting features)
> > 
> > Regards
> > Prem
> > 
> >> -----Original Message-----
> >> From: cisco-bba-bounces at puck.nether.net 
> >> [mailto:cisco-bba-bounces at puck.nether.net] On Behalf Of Stephen 
> >> Fulton
> >> Sent: Friday, May 05, 2006 6:11 PM
> >> To: cisco-bba at puck.nether.net
> >> Subject: Re: [cisco-bba] NPE-G2?
> >>
> >> Mark wrote:
> >>
> >>  > I know that NPG-G2 is single core powerpc based and not 
> multicore 
> >> MIPS  > based...maybe i can expect better performance with NPE-G1 
> >> with MFP
> >>
> >> There is a thread on cisco-nsp (see "MPF (was : NPE-G1 throughput, 
> >> with and without L2TP)") discussing MFP - and perhaps I've 
> >> misunderstood, but it appears MFP support will be dropped after 
> >> 12.4(4)T, except for bug fixes to existing versions.
> >>
> >> The specs on the NPE-G2, as far as BBA is concerned, suggest 
> >> aggregation of up to 16k.  In the real world, that likely 
> means half.  
> >> But we won't know for certain until the first deployments report 
> >> back.
> >>
> >> -- Stephen.
> >>
> >>
> >>
> >>> Hi all!
> >>>
> >>> what change in the broadband aggregation with the
> >> itrodutions of 7200
> >>> NPE-G2?
> >>>
> >>> We can expect to have better performance or more user
> >> aggregated per
> >>> box upgrading to this new NPE over NPE-G1? Some one has
> >> news about this?
> >>> Cisco web site is not referring to anything inew with 
> this release.
> >>>
> >>> I know that NPG-G2 is single core powerpc based and not
> >> multicore MIPS
> >>> based...maybe i can expect better performance with NPE-G1
> >> with MFP IOS
> >>> :-)
> >>>
> >>> mark
> >>> _______________________________________________
> >>> cisco-bba mailing list
> >>> cisco-bba at puck.nether.net
> >>> https://puck.nether.net/mailman/listinfo/cisco-bba
> >> _______________________________________________
> >> cisco-bba mailing list
> >> cisco-bba at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/cisco-bba
> >>
> > 
> > _______________________________________________
> > cisco-bba mailing list
> > cisco-bba at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-bba
> > 
>