[cisco-bba] UPDATE - Only work with 7 user (client)

Mark Johnson mljohnso at cisco.com
Sun Nov 26 09:43:50 EST 2006


At 02:24 AM 11/26/2006 -0500, Tom Miller wrote:


>Mark,
>
>After review the debug output. It seems there is a problem
>at the other end of the L2TP tunnel cause the time out that
>is why it was not able to establish a connection. I am
>sure if I am interpret it correctly and not quite sure
>what to do with it. Please advice.
>
>Look for the ===>               Missed 5 keepalives

This type of problem shouldn't be restricting the total number
of connections, except that it may cause certain connections
to terminate prematurely (potentially after only 50 seconds),
once LCP has been opened.

By default keepalives are enabled and sent every 10 seconds
(there are caveats here, as we will only send keepalives when
there is no traffic on the interface).

Also by default PPP will consider the line inoperable if 5
consecutive keepalives are not replied to (this is configurable
via the keepalive interface command).

Any keepalive loss could be due to the LNS, network, LAC, telco,
or peer.  You should try to understand who's being effected (all
users, only from one LAC, etc) and how consistently.  Workaround
is to disable keepalives, although if the problem effects other
traffic that's not helping much.

You may be able to use <debug ppp error> to narrow down the amount
of debug you have to grok through.

mark



>First attempt:
>
>7w5d: Tnl 10005 L2TP: O Hello to drbrtj08rr.mi.AADS tnlid 36530
>7w5d: Vi8 PPP: Missed 5 keepalives, taking LCP down
>7w5d: Vi8 IPCP: State is Closed
>7w5d: Vi8 PPP: Phase is DOWN [0 sess, 1 load]
>7w5d: Vi8 Tnl/Cl 13221/50405 L2TP: O CDN to sfldse31rr.mi.AADS 22931/57582
>7w5d: Vi8 Tnl/Cl 13221/50405 L2TP: Destroying session
>7w5d: Vi8 Tnl/Cl 13221/50405 L2TP: Session state change from established 
>to idle
>7w5d: Vi8 Tnl/Cl 13221/50405 L2TP: Releasing idb for LAC/LNS tunnel 
>13221/22931 session 50405 state idle
>7w5d: Vi8 VTEMPLATE: Free vaccess
>7w5d: Vi8 VTEMPLATE: Wait for interface to transition to down before freeing
>7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>7w5d: Vi8 PPP: Phase is ESTABLISHING, Passive Open [0 sess, 1 load]
>7w5d: Vi8 LCP: State is Listen
>*Nov 26 00:33:43 UTC: %LINK-3-UPDOWN: Interface Virtual-Access8, changed 
>state to down
>7w5d: Vi8 VTEMPLATE: Wait for line protocol to transition to down before 
>freeing
>7w5d: Vi8 LCP: State is Closed
>7w5d: Vi8 PPP: Phase is DOWN [0 sess, 1 load]
>7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>*Nov 26 00:33:44 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
>Virtual-Access8, changed state to down
>7w5d: Vi8 VTEMPLATE: Interface and line protocol are down, proceed to free
>7w5d: Vi8 Debug: Condition 1, interface Vt1 cleared, count 0
>7w5d: VTEMPLATE: Clean up dirty vaccess queue, size 1
>7w5d: Vi8 VTEMPLATE: Found a dirty vaccess clone with vtemplate
>7w5d: Vi8 VTEMPLATE: ************ UNCLONE VACCESS8 **************
>7w5d: Vi8 VTEMPLATE: Unclone to-be-freed command#7
>interface Virtual-Access8
>default ip unnumbered loopback 2
>default ip address 209.104.172.1 255.255.255.128
>default ip address 209.104.172.1 255.255.255.128
>default ip address 209.104.172.1 255.255.255.128
>default mtu 1492
>default encap ppp
>default ip address
>end
>
>7w5d: Vi8 VTEMPLATE: Remove cloneblk vtemplate with vtemplate
>7w5d: Vi8 VTEMPLATE: Set default settings with no ip address
>7w5d: Vi8 VTEMPLATE: Add vaccess to recycle queue, queue size 2
>
>
>
>
>
>
>********** Second Attempt *****************
>w5d: Vi9 LCP: MRU 1492 (0x010405D4)
>7w5d: Vi9 LCP: AuthProto CHAP (0x0305C22305)
>7w5d: Vi9 LCP: MagicNumber 0x1B89FAC3 (0x05061B89FAC3)
>7w5d: Vi9 LCP: State is Open
>7w5d: Vi9 PPP: Phase is AUTHENTICATING, by this end [0 sess, 1 load]
>7w5d: Vi9 CHAP: O CHALLENGE id 108 len 30 from "EIDSLRtr1"
>7w5d: Vi9 CHAP: I RESPONSE id 108 len 47 from 
>"<mailto:olgchurch at cecom.net>olgchurch at cecom.net"
>*Nov 26 00:46:49 UTC: %SEC-6-IPACCESSLOGP: list 111 permitted udp 
>172.17.17.17(0) (FastEthernet1/0 0003.ba05.1c88) -> 17
>2.17.17.1(0), 1 packet
>7w5d: Vi9 CHAP: O SUCCESS id 108 len 4
>7w5d: Vi9 PPP: Phase is UP [0 sess, 1 load]
>7w5d: Vi9 IPCP: O CONFREQ [Closed] id 1 len 10
>7w5d: Vi9 IPCP: Address 209.104.172.1 (0x03062665AC01)
>7w5d: Vi9 IPCP: I CONFREQ [REQsent] id 77 len 22
>7w5d: Vi9 IPCP: Address 0.0.0.0 (0x030600000000)
>7w5d: Vi9 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
>7w5d: Vi9 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
>7w5d: Vi9 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 0.0.0.0
>7w5d: Vi9 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 209.104.172.13
>7w5d: Vi9 IPCP: O CONFREJ [REQsent] id 77 len 16
>7w5d: Vi9 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
>7w5d: Vi9 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
>7w5d: Vi9 IPCP: I CONFACK [REQsent] id 1 len 10
>7w5d: Vi9 IPCP: Address 209.104.172.1 (0x03062665AC01)
>7w5d: Vi9 IPCP: I CONFREQ [ACKrcvd] id 78 len 10
>7w5d: Vi9 IPCP: Address 0.0.0.0 (0x030600000000)
>7w5d: Vi9 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 209.104.172.13
>7w5d: Vi9 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 209.104.172.13
>7w5d: Vi9 IPCP: O CONFNAK [ACKrcvd] id 78 len 10
>7w5d: Vi9 IPCP: Address 209.104.172.13 (0x03062665AC0D)
>7w5d: Vi9 IPCP: I CONFREQ [ACKrcvd] id 79 len 10
>7w5d: Vi9 IPCP: Address 209.104.172.13 (0x03062665AC0D)
>7w5d: Vi9 AAA/AUTHOR/IPCP: Start. Her address 209.104.172.13, we want 
>209.104.172.13
>7w5d: Vi9 AAA/AUTHOR/IPCP: Done. Her address 209.104.172.13, we want 
>209.104.172.13
>7w5d: Vi9 IPCP: O CONFACK [ACKrcvd] id 79 len 10
>7w5d: Vi9 IPCP: Address 209.104.172.13 (0x03062665AC0D)
>7w5d: Vi9 IPCP: State is Open
>7w5d: Vi9 IPCP: Install route to 209.104.172.13
>*Nov 26 00:46:50 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
>Virtual-Access9, changed state to up
>7w5d: Tnl 47262 L2TP: I Hello from sfldse34rr.mi.AADS tnl 55202
>7w5d: Tnl 10005 L2TP: O Hello to drbrtj08rr.mi.AADS tnlid 36530
>7w5d: Vi9 PPP: Missed 5 keepalives, taking LCP down
>7w5d: Vi9 IPCP: State is Closed
>7w5d: Vi9 PPP: Phase is DOWN [0 sess, 1 load]
>7w5d: Vi9 Tnl/Cl 13221/50406 L2TP: O CDN to sfldse31rr.mi.AADS 22931/59466
>7w5d: Vi9 Tnl/Cl 13221/50406 L2TP: Destroying session
>7w5d: Vi9 Tnl/Cl 13221/50406 L2TP: Session state change from established 
>to idle
>7w5d: Vi9 Tnl/Cl 13221/50406 L2TP: Releasing idb for LAC/LNS tunnel 
>13221/22931 session 50406 state idle
>7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>7w5d: Vi9 PPP: Phase is ESTABLISHING, Passive Open [0 sess, 1 load]
>7w5d: Vi9 LCP: State is Listen
>*Nov 26 00:49:43 UTC: %LINK-3-UPDOWN: Interface Virtual-Access9, changed 
>state to down
>7w5d: Vi9 LCP: State is Closed
>7w5d: Vi9 PPP: Phase is DOWN [0 sess, 1 load]
>7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>7w5d: Vi9 VTEMPLATE: Free vaccess
>7w5d: Vi9 VTEMPLATE: Wait for line protocol to transition to down before 
>freeing
>7w5d: Vi9 IPCP: Remove route to 209.104.172.13
>*Nov 26 00:49:44 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
>Virtual-Access9, changed state to down
>7w5d: Vi9 VTEMPLATE: Interface and line protocol are down, proceed to free
>7w5d: Vi9 Debug: Condition 1, interface Vt1 cleared, count 0
>7w5d: VTEMPLATE: Clean up dirty vaccess queue, size 1
>7w5d: Vi9 VTEMPLATE: Found a dirty vaccess clone with vtemplate
>7w5d: Vi9 VTEMPLATE: ************ UNCLONE VACCESS9 **************
>7w5d: Vi9 VTEMPLATE: Unclone to-be-freed command#7
>interface Virtual-Access9
>default ip unnumbered loopback 2
>default ip address 209.104.172.1 255.255.255.128
>default ip address 209.104.172.1 255.255.255.128
>default ip address 209.104.172.1 255.255.255.128
>default mtu 1492
>default encap ppp
>default ip address
>end
>
>7w5d: Vi9 VTEMPLATE: Remove cloneblk vtemplate with vtemplate
>7w5d: Vi9 VTEMPLATE: Set default settings with no ip address
>7w5d: Vi9 VTEMPLATE: Add vaccess to recycle queue, queue size 2
>
>
>
>
>
>
>
>Thanks much,
>
>Tom
>
>
>
>
>
>
>
>
>
>
>
>
>
>---- Original message ----
> >Date: Wed, 22 Nov 2006 06:34:50 -0800
> >From: Mark Johnson <mljohnso at cisco.com>
> >Subject: Re: Only work with 7 user (client)
> >To: tom at hostwebase.com, gabriel.grissett at gmail.com
> >Cc: cisco-bba at puck.nether.net
> >
> >At 04:08 AM 11/22/2006 -0500, Tom Miller wrote:
> >>Would you guys help me out with this issues again please.
> >>I am having the same problem as before. The Cisco 7204
> >>won't seem to accept any more than 7 users. What am I
> >>missing here?
> >
> >This must be a different problem. Capture <debug ppp neg>
> >for the 8th user attempting to connect; if you don't see
> >any debug output, then the problem is VPDN and you want to
> >have a look at
> >
> >debug vpdn error
> >debug vpdn l2x-event
> >debug vpdn l2x-error
> >debug vtemplate
> >
> >mark
> >
> >
> >
> >>Here is my 7204 configuration:
> >>
> >>aaa new-model
> >>aaa authentication login default local
> >>aaa authentication login console enable
> >>aaa authentication login telnet line
> >>aaa authentication login localauth local
> >>aaa authentication ppp default group radius local
> >>aaa authorization network default group radius local
> >>aaa accounting delay-start
> >>aaa accounting nested
> >>aaa accounting exec default start-stop group radius
> >>aaa accounting network default start-stop group radius
> >>
> >>
> >>
> >>interface Loopback2
> >> ip address 16.10.172.1 255.255.255.128
> >>!
> >>!
> >>interface Virtual-Template1
> >> mtu 1492
> >> ip unnumbered Loopback2
> >> peer default ip address pool DSLCustomer
> >> ppp authentication chap callin
> >>
> >>
> >>
> >>Thanks so much
> >>
> >>Tom
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>---- Original message ----
> >> >Date: Thu, 05 Oct 2006 19:23:24 -0700
> >> >From: Mark Johnson <mljohnso at cisco.com>
> >> >Subject: RE: [cisco-bba] Only work with 5 user (client)
> >> >To: tom at hostwebase.com, gabriel.grissett at gmail.com
> >> >Cc: cisco-bba at puck.nether.net
> >> >
> >> >At 04:31 PM 10/5/2006 -0400, Tom Miller wrote:
> >> >>Guys,
> >> >>
> >> >>It seems to be working fine. The system is currently
> >> >>excepted up to 7 users without any issues. Can you guy
> >> >>enlighten me why it fix with the loopback interface? Is
> >> >>this a bug?
> >> >
> >> >IOS will not allow more than 6 interfaces with the same
> >> >static ip address. Without IP unnumbered, each virtual-
> >> >access interface is cloned with the same IP address as
> >> >the virtual-template, thus you'll fail on the 6th user
> >> >(the VT counts as 1).
> >> >
> >> >mark
> >> >
> >> >
> >> >>Thank you so much for your advices.
> >> >>
> >> >>Tom
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>---- Original message ----
> >> >> >Date: Wed, 4 Oct 2006 14:38:18 -0500
> >> >> >From: "Gabriel Grissett" <gabriel.grissett at gmail.com>
> >> >> >Subject: RE: [cisco-bba] Only work with 5 user
>(client)
> >> >> >To: <tom at hostwebase.com>
> >> >> >
> >> >> >Use a loopback interface ...
> >> >> >
> >> >> >Interface loopback 2
> >> >> > ip address 192.168.172.1 255.255.255.128
> >> >> >
> >> >> >then change your virtual-template to...
> >> >> >
> >> >> >interface Virtual-Template1
> >> >> > mtu 1492
> >> >> > ip unnumbered loopback 2
> >> >> >...
> >> >> >...
> >> >> >...
> >> >> >
> >> >> >This should be in the archives...
> >> >> >
> >> >> >> -----Original Message-----
> >> >> >> From: cisco-bba-bounces at puck.nether.net
>[mailto:cisco-
> >>bba-
> >> >> >> bounces at puck.nether.net] On Behalf Of Tom Miller
> >> >> >> Sent: Wednesday, October 04, 2006 2:28 PM
> >> >> >> To: cisco-bba at puck.nether.net
> >> >> >> Subject: [cisco-bba] Only work with 5 user (client)
> >> >> >>
> >> >> >> I have a 7204 (12.0(22)S1) terminating DSL L2TP VPDN
> >>and
> >> >> >> freeradius ( 1.0.4)
> >> >> >>
> >> >> >> I am having problem when number of users (clients)
> >> >> >> increase from 6 and up.
> >> >> >>
> >> >> >> It worked fine when I have only 5 users (clients)
>using
> >> >> >> the system.
> >> >> >>
> >> >> >> The Cisco 7204 sending missing informationn to the
> >>radius
> >> >> >> server when the user # 6 try to connect.
>Information
> >>such
> >> >> >> as Tunnel-Server-Endpoint and Tunnel-Client-
>Endpoint
> >> >> >>
> >> >> >>
> >> >> >> I must have a missing value within my Cisco
> >>configuration.
> >> >> >> However, I don't know what it is.
> >> >> >>
> >> >> >> Would you guys help me out please.
> >> >> >>
> >> >> >>
> >> >> >> Here is my cisco 7204 configuration:
> >> >> >>
> >> >> >> > aaa new-model
> >> >> >> > aaa authentication login default local
> >> >> >> > aaa authentication login console enable
> >> >> >> > aaa authentication login telnet line
> >> >> >> > aaa authentication login localauth local
> >> >> >> > aaa authentication ppp default group radius local
> >> >> >> > aaa authorization network default group radius
>local
> >> >> >> > aaa accounting delay-start
> >> >> >> > aaa accounting nested
> >> >> >> > aaa accounting exec default start-stop group
>radius
> >> >> >> > aaa accounting network default start-stop group
> >>radius
> >> >> >> >
> >> >> >> >
> >> >> >> > !
> >> >> >> > vpdn enable
> >> >> >> > vpdn aaa override-server 172.17.17.17
> >> >> >> > !
> >> >> >> > vpdn-group 1
> >> >> >> > accept-dialin
> >> >> >> > protocol l2tp
> >> >> >> > virtual-template 1
> >> >> >> > terminate-from hostname aaaabbbr.ca.AADS
> >> >> >> > local name abc123456789cha
> >> >> >> > lcp renegotiation always
> >> >> >> > l2tp tunnel password 7 xxxxxxxxxxxxxxxx
> >> >> >> > !
> >> >> >> >
> >> >> >> > radius-server host 172.17.17.17 auth-port 1645
>acct-
> >>port
> >> >> >> 1646
> >> >> >> >
> >> >> >> >
> >> >> >> > !
> >> >> >> > interface Virtual-Template1
> >> >> >> > mtu 1492
> >> >> >> > ip address 192.168.172.1 255.255.255.128
> >> >> >> > peer default ip address pool DSLCustomer
> >> >> >> > ppp authentication chap callin
> >> >> >> > !
> >> >> >> > ip local pool DSLCustomer 192.168.172.51
> >>192.168.172.125
> >> >> >>
> >> >> >>
> >> >> >> Thank you,
> >> >> >>
> >> >> >> Tom
> >> >> >>
> >> >> >> _______________________________________________
> >> >> >> cisco-bba mailing list
> >> >> >> cisco-bba at puck.nether.net
> >> >> >> https://puck.nether.net/mailman/listinfo/cisco-bba
> >> >> >
> >> >
> >
>
>First attempt:
>
>7w5d: Tnl 10005 L2TP: O Hello to drbrtj08rr.mi.AADS tnlid 36530
>7w5d: Vi8 PPP: Missed 5 keepalives, taking LCP down
>7w5d: Vi8 IPCP: State is Closed
>7w5d: Vi8 PPP: Phase is DOWN [0 sess, 1 load]
>7w5d: Vi8 Tnl/Cl 13221/50405 L2TP: O CDN to sfldse31rr.mi.AADS 22931/57582
>7w5d: Vi8 Tnl/Cl 13221/50405 L2TP: Destroying session
>7w5d: Vi8 Tnl/Cl 13221/50405 L2TP: Session state change from established 
>to idle
>7w5d: Vi8 Tnl/Cl 13221/50405 L2TP: Releasing idb for LAC/LNS tunnel 
>13221/22931 session 50405 state idle
>7w5d: Vi8 VTEMPLATE: Free vaccess
>7w5d: Vi8 VTEMPLATE: Wait for interface to transition to down before freeing
>7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>7w5d: Vi8 PPP: Phase is ESTABLISHING, Passive Open [0 sess, 1 load]
>7w5d: Vi8 LCP: State is Listen
>*Nov 26 00:33:43 UTC: %LINK-3-UPDOWN: Interface Virtual-Access8, changed 
>state to down
>7w5d: Vi8 VTEMPLATE: Wait for line protocol to transition to down before 
>freeing
>7w5d: Vi8 LCP: State is Closed
>7w5d: Vi8 PPP: Phase is DOWN [0 sess, 1 load]
>7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>*Nov 26 00:33:44 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
>Virtual-Access8, changed state to down
>7w5d: Vi8 VTEMPLATE: Interface and line protocol are down, proceed to free
>7w5d: Vi8 Debug: Condition 1, interface Vt1 cleared, count 0
>7w5d: VTEMPLATE: Clean up dirty vaccess queue, size 1
>7w5d: Vi8 VTEMPLATE: Found a dirty vaccess clone with vtemplate
>7w5d: Vi8 VTEMPLATE: ************ UNCLONE VACCESS8 **************
>7w5d: Vi8 VTEMPLATE: Unclone to-be-freed command#7
>interface Virtual-Access8
>default ip unnumbered loopback 2
>default ip address 209.104.172.1 255.255.255.128
>default ip address 209.104.172.1 255.255.255.128
>default ip address 209.104.172.1 255.255.255.128
>default mtu 1492
>default encap ppp
>default ip address
>end
>
>7w5d: Vi8 VTEMPLATE: Remove cloneblk vtemplate with vtemplate
>7w5d: Vi8 VTEMPLATE: Set default settings with no ip address
>7w5d: Vi8 VTEMPLATE: Add vaccess to recycle queue, queue size 2
>
>********** Second Attempt *****************
>w5d: Vi9 LCP: MRU 1492 (0x010405D4)
>7w5d: Vi9 LCP: AuthProto CHAP (0x0305C22305)
>7w5d: Vi9 LCP: MagicNumber 0x1B89FAC3 (0x05061B89FAC3)
>7w5d: Vi9 LCP: State is Open
>7w5d: Vi9 PPP: Phase is AUTHENTICATING, by this end [0 sess, 1 load]
>7w5d: Vi9 CHAP: O CHALLENGE id 108 len 30 from "EIDSLRtr1"
>7w5d: Vi9 CHAP: I RESPONSE id 108 len 47 from "olgchurch at cecom.net"
>*Nov 26 00:46:49 UTC: %SEC-6-IPACCESSLOGP: list 111 permitted udp 
>172.17.17.17(0) (FastEthernet1/0 0003.ba05.1c88) -> 17
>2.17.17.1(0), 1 packet
>7w5d: Vi9 CHAP: O SUCCESS id 108 len 4
>7w5d: Vi9 PPP: Phase is UP [0 sess, 1 load]
>7w5d: Vi9 IPCP: O CONFREQ [Closed] id 1 len 10
>7w5d: Vi9 IPCP: Address 209.104.172.1 (0x03062665AC01)
>7w5d: Vi9 IPCP: I CONFREQ [REQsent] id 77 len 22
>7w5d: Vi9 IPCP: Address 0.0.0.0 (0x030600000000)
>7w5d: Vi9 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
>7w5d: Vi9 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
>7w5d: Vi9 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 0.0.0.0
>7w5d: Vi9 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 209.104.172.13
>7w5d: Vi9 IPCP: O CONFREJ [REQsent] id 77 len 16
>7w5d: Vi9 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
>7w5d: Vi9 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
>7w5d: Vi9 IPCP: I CONFACK [REQsent] id 1 len 10
>7w5d: Vi9 IPCP: Address 209.104.172.1 (0x03062665AC01)
>7w5d: Vi9 IPCP: I CONFREQ [ACKrcvd] id 78 len 10
>7w5d: Vi9 IPCP: Address 0.0.0.0 (0x030600000000)
>7w5d: Vi9 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 209.104.172.13
>7w5d: Vi9 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 209.104.172.13
>7w5d: Vi9 IPCP: O CONFNAK [ACKrcvd] id 78 len 10
>7w5d: Vi9 IPCP: Address 209.104.172.13 (0x03062665AC0D)
>7w5d: Vi9 IPCP: I CONFREQ [ACKrcvd] id 79 len 10
>7w5d: Vi9 IPCP: Address 209.104.172.13 (0x03062665AC0D)
>7w5d: Vi9 AAA/AUTHOR/IPCP: Start. Her address 209.104.172.13, we want 
>209.104.172.13
>7w5d: Vi9 AAA/AUTHOR/IPCP: Done. Her address 209.104.172.13, we want 
>209.104.172.13
>7w5d: Vi9 IPCP: O CONFACK [ACKrcvd] id 79 len 10
>7w5d: Vi9 IPCP: Address 209.104.172.13 (0x03062665AC0D)
>7w5d: Vi9 IPCP: State is Open
>7w5d: Vi9 IPCP: Install route to 209.104.172.13
>*Nov 26 00:46:50 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
>Virtual-Access9, changed state to up
>7w5d: Tnl 47262 L2TP: I Hello from sfldse34rr.mi.AADS tnl 55202
>7w5d: Tnl 10005 L2TP: O Hello to drbrtj08rr.mi.AADS tnlid 36530
>7w5d: Vi9 PPP: Missed 5 keepalives, taking LCP down
>7w5d: Vi9 IPCP: State is Closed
>7w5d: Vi9 PPP: Phase is DOWN [0 sess, 1 load]
>7w5d: Vi9 Tnl/Cl 13221/50406 L2TP: O CDN to sfldse31rr.mi.AADS 22931/59466
>7w5d: Vi9 Tnl/Cl 13221/50406 L2TP: Destroying session
>7w5d: Vi9 Tnl/Cl 13221/50406 L2TP: Session state change from established 
>to idle
>7w5d: Vi9 Tnl/Cl 13221/50406 L2TP: Releasing idb for LAC/LNS tunnel 
>13221/22931 session 50406 state idle
>7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>7w5d: Vi9 PPP: Phase is ESTABLISHING, Passive Open [0 sess, 1 load]
>7w5d: Vi9 LCP: State is Listen
>*Nov 26 00:49:43 UTC: %LINK-3-UPDOWN: Interface Virtual-Access9, changed 
>state to down
>7w5d: Vi9 LCP: State is Closed
>7w5d: Vi9 PPP: Phase is DOWN [0 sess, 1 load]
>7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>7w5d: Vi9 VTEMPLATE: Free vaccess
>7w5d: Vi9 VTEMPLATE: Wait for line protocol to transition to down before 
>freeing
>7w5d: Vi9 IPCP: Remove route to 209.104.172.13
>*Nov 26 00:49:44 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
>Virtual-Access9, changed state to down
>7w5d: Vi9 VTEMPLATE: Interface and line protocol are down, proceed to free
>7w5d: Vi9 Debug: Condition 1, interface Vt1 cleared, count 0
>7w5d: VTEMPLATE: Clean up dirty vaccess queue, size 1
>7w5d: Vi9 VTEMPLATE: Found a dirty vaccess clone with vtemplate
>7w5d: Vi9 VTEMPLATE: ************ UNCLONE VACCESS9 **************
>7w5d: Vi9 VTEMPLATE: Unclone to-be-freed command#7
>interface Virtual-Access9
>default ip unnumbered loopback 2
>default ip address 209.104.172.1 255.255.255.128
>default ip address 209.104.172.1 255.255.255.128
>default ip address 209.104.172.1 255.255.255.128
>default mtu 1492
>default encap ppp
>default ip address
>end
>
>7w5d: Vi9 VTEMPLATE: Remove cloneblk vtemplate with vtemplate
>7w5d: Vi9 VTEMPLATE: Set default settings with no ip address
>7w5d: Vi9 VTEMPLATE: Add vaccess to recycle queue, queue size 2
>



More information about the cisco-bba mailing list