[cisco-bba] UPDATE - Only work with 7 user
Oliver Boehmer (oboehmer)
oboehmer at cisco.com
Wed Nov 29 02:09:13 EST 2006
Tom,
How does your Radius profile look like? If the profile doesn't contain any reference to 38.209.172.1, it might be a left-over from previous vtemplate configs, so please nuke your vtemplate ("no int virtual-template 1") and re-create it from scratch.
oli
cisco-bba-bounces at puck.nether.net <> wrote on Wednesday, November 29, 2006 1:27 AM:
> Mark,
>
> Can you tell me what does it mean
> 38.209.172.0 overlaps with Loopback2.
>
> I have only eight users and they are just keep
> dropping off. They are taking turn tobe off line.
> The upstream LAC device have been reset by SBC/ATT.
> I might have to turn off the keep alive to see what
> happen. Any other sugguestion?
>
> Thanks,
> Tom
>
>
>
> ****Here are the rest of there log ***********
> 8w1d: Vi10 VTEMPLATE: Remove cloneblk vtemplate with vtemplate
> 8w1d: Vi10 VTEMPLATE: Set default settings with no ip address
> 8w1d: Vi10 VTEMPLATE: Add vaccess to recycle queue, queue size 3
> 8w1d: Vt1 VTEMPLATE: Unable to create and clone vaccess
> 8w1d: Vi3 VTEMPLATE: Reuse Vi3, recycle queue size 2
> 8w1d: Vi3 VTEMPLATE: Hardware address 0002.174f.501c
> 8w1d: Vi3 VTEMPLATE: Has a new cloneblk vtemplate, now it has
> vtemplate 8w1d: Vi3 VTEMPLATE: ************* CLONE VACCESS3
> *****************
> 8w1d: Vi3 VTEMPLATE: Clone from Virtual-Template1
> interface Virtual-Access3
> default ip address
> no ip address
> encap ppp
> mtu 1492
> 255.255.255.128
> no ip address 38.209.172.1 255.255.255.128
> no ip address 38.209.172.1 255.255.255.128
> ip unnumbered loopback 2
> end
>
> 8w1d: Vi3 VTEMPLATE: Messages from (un)cloning ...
> 38.209.172.0 overlaps with Loopback2
>
> 8w1d: Vi3 VTEMPLATE: Messages from (un)cloning ...
> Invalid address
>
>
>
>
>
>
>
>
>
>
>
> ---- Original message ----
>> Date: Sun, 26 Nov 2006 06:43:50 -0800
>> From: Mark Johnson <mljohnso at cisco.com>
>> Subject: Re: UPDATE - Only work with 7 user (client)
>> To: tom at hostwebase.com, gabriel.grissett at gmail.com
>> Cc: cisco-bba at puck.nether.net
>>
>> At 02:24 AM 11/26/2006 -0500, Tom Miller wrote:
>>
>>
>>> Mark,
>>>
>>> After review the debug output. It seems there is a problem
>>> at the other end of the L2TP tunnel cause the time out that
>>> is why it was not able to establish a connection. I am
>>> sure if I am interpret it correctly and not quite sure
>>> what to do with it. Please advice.
>>>
>>> Look for the ===> Missed 5 keepalives
>>
>> This type of problem shouldn't be restricting the total number
>> of connections, except that it may cause certain connections
>> to terminate prematurely (potentially after only 50 seconds), once
>> LCP has been opened.
>>
>> By default keepalives are enabled and sent every 10 seconds
>> (there are caveats here, as we will only send keepalives when
>> there is no traffic on the interface).
>>
>> Also by default PPP will consider the line inoperable if 5
>> consecutive keepalives are not replied to (this is configurable
>> via the keepalive interface command).
>>
>> Any keepalive loss could be due to the LNS, network, LAC, telco,
>> or peer. You should try to understand who's being effected (all
>> users, only from one LAC, etc) and how consistently. Workaround
>> is to disable keepalives, although if the problem effects other
>> traffic that's not helping much.
>>
>> You may be able to use <debug ppp error> to narrow down the amount
>> of debug you have to grok through.
>>
>> mark
>>
>>
>>
>>> First attempt:
>>>
>>> 7w5d: Tnl 10005 L2TP: O Hello to drbrtj08rr.mi.AADS tnlid 36530
>>> 7w5d: Vi8 PPP: Missed 5 keepalives, taking LCP down
>>> 7w5d: Vi8 IPCP: State is Closed
>>> 7w5d: Vi8 PPP: Phase is DOWN [0 sess, 1 load]
>>> 7w5d: Vi8 Tnl/Cl 13221/50405 L2TP: O CDN to sfldse31rr.mi.AADS
>>> 22931/57582 7w5d: Vi8 Tnl/Cl 13221/50405 L2TP: Destroying session
>>> 7w5d: Vi8 Tnl/Cl 13221/50405 L2TP: Session state change from
>>> established to idle 7w5d: Vi8 Tnl/Cl 13221/50405 L2TP: Releasing
>>> idb for LAC/LNS tunnel 13221/22931 session 50405 state idle
>>> 7w5d: Vi8 VTEMPLATE: Free vaccess
>>> 7w5d: Vi8 VTEMPLATE: Wait for interface to transition to down
>>> before freeing 7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>>> 7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>>> 7w5d: Vi8 PPP: Phase is ESTABLISHING, Passive Open [0 sess, 1 load]
>>> 7w5d: Vi8 LCP: State is Listen
>>> *Nov 26 00:33:43 UTC: %LINK-3-UPDOWN: Interface Virtual- Access8,
>>> changed state to down 7w5d: Vi8 VTEMPLATE: Wait for line protocol
>>> to transition to down before freeing 7w5d: Vi8 LCP: State is Closed
>>> 7w5d: Vi8 PPP: Phase is DOWN [0 sess, 1 load]
>>> 7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>>> 7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>>> 7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>>> *Nov 26 00:33:44 UTC: %LINEPROTO-5-UPDOWN: Line protocol on
>>> Interface Virtual-Access8, changed state to down
>>> 7w5d: Vi8 VTEMPLATE: Interface and line protocol are down, proceed
>>> to free 7w5d: Vi8 Debug: Condition 1, interface Vt1 cleared, count 0
>>> 7w5d: VTEMPLATE: Clean up dirty vaccess queue, size 1
>>> 7w5d: Vi8 VTEMPLATE: Found a dirty vaccess clone with vtemplate
>>> 7w5d: Vi8 VTEMPLATE: ************ UNCLONE VACCESS8 **************
>>> 7w5d: Vi8 VTEMPLATE: Unclone to-be-freed command#7
>>> interface Virtual-Access8
>>> default ip unnumbered loopback 2
>>> default ip address 209.104.172.1 255.255.255.128
>>> default ip address 209.104.172.1 255.255.255.128
>>> default ip address 209.104.172.1 255.255.255.128
>>> default mtu 1492
>>> default encap ppp
>>> default ip address
>>> end
>>>
>>> 7w5d: Vi8 VTEMPLATE: Remove cloneblk vtemplate with vtemplate
>>> 7w5d: Vi8 VTEMPLATE: Set default settings with no ip address
>>> 7w5d: Vi8 VTEMPLATE: Add vaccess to recycle queue, queue size 2
>>>
>>>
>>>
>>>
>>>
>>>
>>> ********** Second Attempt *****************
>>> w5d: Vi9 LCP: MRU 1492 (0x010405D4)
>>> 7w5d: Vi9 LCP: AuthProto CHAP (0x0305C22305)
>>> 7w5d: Vi9 LCP: MagicNumber 0x1B89FAC3 (0x05061B89FAC3) 7w5d: Vi9
>>> LCP: State is Open 7w5d: Vi9 PPP: Phase is AUTHENTICATING, by this
>>> end [0 sess, 1 load] 7w5d: Vi9 CHAP: O CHALLENGE id 108 len 30 from
>>> "EIDSLRtr1" 7w5d: Vi9 CHAP: I RESPONSE id 108 len 47 from
>>> "<mailto:olgchurch at cecom.net>olgchurch at cecom.net"
>>> *Nov 26 00:46:49 UTC: %SEC-6-IPACCESSLOGP: list 111 permitted udp
>>> 172.17.17.17(0) (FastEthernet1/0 0003.ba05.1c88) -> 17
>>> 2.17.17.1(0), 1 packet
>>> 7w5d: Vi9 CHAP: O SUCCESS id 108 len 4
>>> 7w5d: Vi9 PPP: Phase is UP [0 sess, 1 load]
>>> 7w5d: Vi9 IPCP: O CONFREQ [Closed] id 1 len 10
>>> 7w5d: Vi9 IPCP: Address 209.104.172.1 (0x03062665AC01)
>>> 7w5d: Vi9 IPCP: I CONFREQ [REQsent] id 77 len 22
>>> 7w5d: Vi9 IPCP: Address 0.0.0.0 (0x030600000000)
>>> 7w5d: Vi9 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
>>> 7w5d: Vi9 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
>>> 7w5d: Vi9 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want
>>> 0.0.0.0 7w5d: Vi9 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we
>>> want 209.104.172.13 7w5d: Vi9 IPCP: O CONFREJ [REQsent] id 77 len 16
>>> 7w5d: Vi9 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
>>> 7w5d: Vi9 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
>>> 7w5d: Vi9 IPCP: I CONFACK [REQsent] id 1 len 10
>>> 7w5d: Vi9 IPCP: Address 209.104.172.1 (0x03062665AC01)
>>> 7w5d: Vi9 IPCP: I CONFREQ [ACKrcvd] id 78 len 10
>>> 7w5d: Vi9 IPCP: Address 0.0.0.0 (0x030600000000)
>>> 7w5d: Vi9 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want
>>> 209.104.172.13 7w5d: Vi9 AAA/AUTHOR/IPCP: Done. Her address
>>> 0.0.0.0, we want 209.104.172.13 7w5d: Vi9 IPCP: O CONFNAK [ACKrcvd]
>>> id 78 len 10 7w5d: Vi9 IPCP: Address 209.104.172.13 (0x03062665AC0D)
>>> 7w5d: Vi9 IPCP: I CONFREQ [ACKrcvd] id 79 len 10
>>> 7w5d: Vi9 IPCP: Address 209.104.172.13 (0x03062665AC0D)
>>> 7w5d: Vi9 AAA/AUTHOR/IPCP: Start. Her address 209.104.172.13, we
>>> want 209.104.172.13 7w5d: Vi9 AAA/AUTHOR/IPCP: Done. Her address
>>> 209.104.172.13, we want 209.104.172.13 7w5d: Vi9 IPCP: O CONFACK
>>> [ACKrcvd] id 79 len 10 7w5d: Vi9 IPCP: Address 209.104.172.13
>>> (0x03062665AC0D) 7w5d: Vi9 IPCP: State is Open 7w5d: Vi9 IPCP:
>>> Install route to 209.104.172.13 *Nov 26 00:46:50 UTC:
>>> %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access9,
>>> changed state to up 7w5d: Tnl 47262 L2TP: I Hello from
>>> sfldse34rr.mi.AADS tnl 55202 7w5d: Tnl 10005 L2TP: O Hello to
>>> drbrtj08rr.mi.AADS tnlid 36530 7w5d: Vi9 PPP: Missed 5 keepalives,
>>> taking LCP down 7w5d: Vi9 IPCP: State is Closed
>>> 7w5d: Vi9 PPP: Phase is DOWN [0 sess, 1 load]
>>> 7w5d: Vi9 Tnl/Cl 13221/50406 L2TP: O CDN to sfldse31rr.mi.AADS
>>> 22931/59466 7w5d: Vi9 Tnl/Cl 13221/50406 L2TP: Destroying session
>>> 7w5d: Vi9 Tnl/Cl 13221/50406 L2TP: Session state change from
>>> established to idle 7w5d: Vi9 Tnl/Cl 13221/50406 L2TP: Releasing
>>> idb for LAC/LNS tunnel 13221/22931 session 50406 state idle
>>> 7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>>> 7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>>> 7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>>> 7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>>> 7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>>> 7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>>> 7w5d: Vi9 PPP: Phase is ESTABLISHING, Passive Open [0 sess, 1 load]
>>> 7w5d: Vi9 LCP: State is Listen
>>> *Nov 26 00:49:43 UTC: %LINK-3-UPDOWN: Interface Virtual- Access9,
>>> changed state to down 7w5d: Vi9 LCP: State is Closed
>>> 7w5d: Vi9 PPP: Phase is DOWN [0 sess, 1 load]
>>> 7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>>> 7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>>> 7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>>> 7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>>> 7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>>> 7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>>> 7w5d: Vi9 VTEMPLATE: Free vaccess
>>> 7w5d: Vi9 VTEMPLATE: Wait for line protocol to transition to down
>>> before freeing 7w5d: Vi9 IPCP: Remove route to 209.104.172.13
>>> *Nov 26 00:49:44 UTC: %LINEPROTO-5-UPDOWN: Line protocol on
>>> Interface Virtual-Access9, changed state to down
>>> 7w5d: Vi9 VTEMPLATE: Interface and line protocol are down, proceed
>>> to free 7w5d: Vi9 Debug: Condition 1, interface Vt1 cleared, count 0
>>> 7w5d: VTEMPLATE: Clean up dirty vaccess queue, size 1
>>> 7w5d: Vi9 VTEMPLATE: Found a dirty vaccess clone with vtemplate
>>> 7w5d: Vi9 VTEMPLATE: ************ UNCLONE VACCESS9 **************
>>> 7w5d: Vi9 VTEMPLATE: Unclone to-be-freed command#7
>>> interface Virtual-Access9
>>> default ip unnumbered loopback 2
>>> default ip address 209.104.172.1 255.255.255.128
>>> default ip address 209.104.172.1 255.255.255.128
>>> default ip address 209.104.172.1 255.255.255.128
>>> default mtu 1492
>>> default encap ppp
>>> default ip address
>>> end
>>>
>>> 7w5d: Vi9 VTEMPLATE: Remove cloneblk vtemplate with vtemplate
>>> 7w5d: Vi9 VTEMPLATE: Set default settings with no ip address
>>> 7w5d: Vi9 VTEMPLATE: Add vaccess to recycle queue, queue size 2
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Thanks much,
>>>
>>> Tom
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> ---- Original message ----
>>>> Date: Wed, 22 Nov 2006 06:34:50 -0800
>>>> From: Mark Johnson <mljohnso at cisco.com>
>>>> Subject: Re: Only work with 7 user (client)
>>>> To: tom at hostwebase.com, gabriel.grissett at gmail.com
>>>> Cc: cisco-bba at puck.nether.net
>>>>
>>>> At 04:08 AM 11/22/2006 -0500, Tom Miller wrote:
>>>>> Would you guys help me out with this issues again please.
>>>>> I am having the same problem as before. The Cisco 7204
>>>>> won't seem to accept any more than 7 users. What am I
>>>>> missing here?
>>>>
>>>> This must be a different problem. Capture <debug ppp neg>
>>>> for the 8th user attempting to connect; if you don't see
>>>> any debug output, then the problem is VPDN and you want to have a
>>>> look at
>>>>
>>>> debug vpdn error
>>>> debug vpdn l2x-event
>>>> debug vpdn l2x-error
>>>> debug vtemplate
>>>>
>>>> mark
>>>>
>>>>
>>>>
>>>>> Here is my 7204 configuration:
>>>>>
>>>>> aaa new-model
>>>>> aaa authentication login default local
>>>>> aaa authentication login console enable
>>>>> aaa authentication login telnet line
>>>>> aaa authentication login localauth local
>>>>> aaa authentication ppp default group radius local
>>>>> aaa authorization network default group radius local
>>>>> aaa accounting delay-start
>>>>> aaa accounting nested
>>>>> aaa accounting exec default start-stop group radius
>>>>> aaa accounting network default start-stop group radius
>>>>>
>>>>>
>>>>>
>>>>> interface Loopback2
>>>>> ip address 16.10.172.1 255.255.255.128
>>>>> !
>>>>> !
>>>>> interface Virtual-Template1
>>>>> mtu 1492
>>>>> ip unnumbered Loopback2
>>>>> peer default ip address pool DSLCustomer
>>>>> ppp authentication chap callin
>>>>>
>>>>>
>>>>>
>>>>> Thanks so much
>>>>>
>>>>> Tom
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ---- Original message ----
>>>>>> Date: Thu, 05 Oct 2006 19:23:24 -0700
>>>>>> From: Mark Johnson <mljohnso at cisco.com>
>>>>>> Subject: RE: [cisco-bba] Only work with 5 user (client)
>>>>>> To: tom at hostwebase.com, gabriel.grissett at gmail.com
>>>>>> Cc: cisco-bba at puck.nether.net
>>>>>>
>>>>>> At 04:31 PM 10/5/2006 -0400, Tom Miller wrote:
>>>>>>> Guys,
>>>>>>>
>>>>>>> It seems to be working fine. The system is currently
>>>>>>> excepted up to 7 users without any issues. Can you guy
>>>>>>> enlighten me why it fix with the loopback interface? Is
>>>>>>> this a bug?
>>>>>>
>>>>>> IOS will not allow more than 6 interfaces with the same
>>>>>> static ip address. Without IP unnumbered, each virtual-
>>>>>> access interface is cloned with the same IP address as
>>>>>> the virtual-template, thus you'll fail on the 6th user (the VT
>>>>>> counts as 1).
>>>>>>
>>>>>> mark
>>>>>>
>>>>>>
>>>>>>> Thank you so much for your advices.
>>>>>>>
>>>>>>> Tom
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> ---- Original message ----
>>>>>>>> Date: Wed, 4 Oct 2006 14:38:18 -0500
>>>>>>>> From: "Gabriel Grissett" <gabriel.grissett at gmail.com>
>>>>>>>> Subject: RE: [cisco-bba] Only work with 5 user (client) To:
>>>>>>>> <tom at hostwebase.com>
>>>>>>>>
>>>>>>>> Use a loopback interface ...
>>>>>>>>
>>>>>>>> Interface loopback 2
>>>>>>>> ip address 192.168.172.1 255.255.255.128
>>>>>>>>
>>>>>>>> then change your virtual-template to...
>>>>>>>>
>>>>>>>> interface Virtual-Template1
>>>>>>>> mtu 1492
>>>>>>>> ip unnumbered loopback 2
>>>>>>>> ...
>>>>>>>> ...
>>>>>>>> ...
>>>>>>>>
>>>>>>>> This should be in the archives...
>>>>>>>>
>>>>>>>>> -----Original Message-----
>>>>>>>>> From: cisco-bba-bounces at puck.nether.net [mailto:cisco- bba-
>>>>>>>>> bounces at puck.nether.net] On Behalf Of Tom Miller
>>>>>>>>> Sent: Wednesday, October 04, 2006 2:28 PM
>>>>>>>>> To: cisco-bba at puck.nether.net
>>>>>>>>> Subject: [cisco-bba] Only work with 5 user (client)
>>>>>>>>>
>>>>>>>>> I have a 7204 (12.0(22)S1) terminating DSL L2TP VPDN and
>>>>>>>>> freeradius ( 1.0.4)
>>>>>>>>>
>>>>>>>>> I am having problem when number of users (clients)
>>>>>>>>> increase from 6 and up.
>>>>>>>>>
>>>>>>>>> It worked fine when I have only 5 users (clients) using the
>>>>>>>>> system.
>>>>>>>>>
>>>>>>>>> The Cisco 7204 sending missing informationn to the radius
>>>>>>>>> server when the user # 6 try to connect. Information such
>>>>>>>>> as Tunnel-Server-Endpoint and Tunnel-Client- Endpoint
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I must have a missing value within my Cisco configuration.
>>>>>>>>> However, I don't know what it is.
>>>>>>>>>
>>>>>>>>> Would you guys help me out please.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Here is my cisco 7204 configuration:
>>>>>>>>>
>>>>>>>>>> aaa new-model
>>>>>>>>>> aaa authentication login default local
>>>>>>>>>> aaa authentication login console enable
>>>>>>>>>> aaa authentication login telnet line
>>>>>>>>>> aaa authentication login localauth local
>>>>>>>>>> aaa authentication ppp default group radius local
>>>>>>>>>> aaa authorization network default group radius local aaa
>>>>>>>>>> accounting delay-start aaa accounting nested
>>>>>>>>>> aaa accounting exec default start-stop group radius
>>>>>>>>>> aaa accounting network default start-stop group radius
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> !
>>>>>>>>>> vpdn enable
>>>>>>>>>> vpdn aaa override-server 172.17.17.17
>>>>>>>>>> !
>>>>>>>>>> vpdn-group 1
>>>>>>>>>> accept-dialin
>>>>>>>>>> protocol l2tp
>>>>>>>>>> virtual-template 1
>>>>>>>>>> terminate-from hostname aaaabbbr.ca.AADS
>>>>>>>>>> local name abc123456789cha
>>>>>>>>>> lcp renegotiation always
>>>>>>>>>> l2tp tunnel password 7 xxxxxxxxxxxxxxxx
>>>>>>>>>> !
>>>>>>>>>>
>>>>>>>>>> radius-server host 172.17.17.17 auth-port 1645
>>> acct-
>>>>> port
>>>>>>>>> 1646
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> !
>>>>>>>>>> interface Virtual-Template1
>>>>>>>>>> mtu 1492
>>>>>>>>>> ip address 192.168.172.1 255.255.255.128
>>>>>>>>>> peer default ip address pool DSLCustomer
>>>>>>>>>> ppp authentication chap callin
>>>>>>>>>> !
>>>>>>>>>> ip local pool DSLCustomer 192.168.172.51 192.168.172.125
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Thank you,
>>>>>>>>>
>>>>>>>>> Tom
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> cisco-bba mailing list
>>>>>>>>> cisco-bba at puck.nether.net
>>>>>>>>> https://puck.nether.net/mailman/listinfo/cisco-bba
>>>>>>>>
>>>>>>
>>>>
>>>
>>> First attempt:
>>>
>>> 7w5d: Tnl 10005 L2TP: O Hello to drbrtj08rr.mi.AADS tnlid 36530
>>> 7w5d: Vi8 PPP: Missed 5 keepalives, taking LCP down
>>> 7w5d: Vi8 IPCP: State is Closed
>>> 7w5d: Vi8 PPP: Phase is DOWN [0 sess, 1 load]
>>> 7w5d: Vi8 Tnl/Cl 13221/50405 L2TP: O CDN to sfldse31rr.mi.AADS
>>> 22931/57582 7w5d: Vi8 Tnl/Cl 13221/50405 L2TP: Destroying session
>>> 7w5d: Vi8 Tnl/Cl 13221/50405 L2TP: Session state change from
>>> established to idle 7w5d: Vi8 Tnl/Cl 13221/50405 L2TP: Releasing
>>> idb for LAC/LNS tunnel 13221/22931 session 50405 state idle
>>> 7w5d: Vi8 VTEMPLATE: Free vaccess
>>> 7w5d: Vi8 VTEMPLATE: Wait for interface to transition to down
>>> before freeing 7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>>> 7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>>> 7w5d: Vi8 PPP: Phase is ESTABLISHING, Passive Open [0 sess, 1 load]
>>> 7w5d: Vi8 LCP: State is Listen
>>> *Nov 26 00:33:43 UTC: %LINK-3-UPDOWN: Interface Virtual- Access8,
>>> changed state to down 7w5d: Vi8 VTEMPLATE: Wait for line protocol
>>> to transition to down before freeing 7w5d: Vi8 LCP: State is Closed
>>> 7w5d: Vi8 PPP: Phase is DOWN [0 sess, 1 load]
>>> 7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>>> 7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>>> 7w5d: Vi8 VTEMPLATE: Try to free a freed vaccess
>>> *Nov 26 00:33:44 UTC: %LINEPROTO-5-UPDOWN: Line protocol on
>>> Interface Virtual-Access8, changed state to down
>>> 7w5d: Vi8 VTEMPLATE: Interface and line protocol are down, proceed
>>> to free 7w5d: Vi8 Debug: Condition 1, interface Vt1 cleared, count 0
>>> 7w5d: VTEMPLATE: Clean up dirty vaccess queue, size 1
>>> 7w5d: Vi8 VTEMPLATE: Found a dirty vaccess clone with vtemplate
>>> 7w5d: Vi8 VTEMPLATE: ************ UNCLONE VACCESS8 **************
>>> 7w5d: Vi8 VTEMPLATE: Unclone to-be-freed command#7
>>> interface Virtual-Access8
>>> default ip unnumbered loopback 2
>>> default ip address 209.104.172.1 255.255.255.128
>>> default ip address 209.104.172.1 255.255.255.128
>>> default ip address 209.104.172.1 255.255.255.128
>>> default mtu 1492
>>> default encap ppp
>>> default ip address
>>> end
>>>
>>> 7w5d: Vi8 VTEMPLATE: Remove cloneblk vtemplate with vtemplate
>>> 7w5d: Vi8 VTEMPLATE: Set default settings with no ip address
>>> 7w5d: Vi8 VTEMPLATE: Add vaccess to recycle queue, queue size 2
>>>
>>> ********** Second Attempt *****************
>>> w5d: Vi9 LCP: MRU 1492 (0x010405D4)
>>> 7w5d: Vi9 LCP: AuthProto CHAP (0x0305C22305)
>>> 7w5d: Vi9 LCP: MagicNumber 0x1B89FAC3 (0x05061B89FAC3) 7w5d: Vi9
>>> LCP: State is Open 7w5d: Vi9 PPP: Phase is AUTHENTICATING, by this
>>> end [0 sess, 1 load] 7w5d: Vi9 CHAP: O CHALLENGE id 108 len 30 from
>>> "EIDSLRtr1" 7w5d: Vi9 CHAP: I RESPONSE id 108 len 47
> from "olgchurch at cecom.net"
>>> *Nov 26 00:46:49 UTC: %SEC-6-IPACCESSLOGP: list 111 permitted udp
>>> 172.17.17.17(0) (FastEthernet1/0 0003.ba05.1c88) -> 17
>>> 2.17.17.1(0), 1 packet
>>> 7w5d: Vi9 CHAP: O SUCCESS id 108 len 4
>>> 7w5d: Vi9 PPP: Phase is UP [0 sess, 1 load]
>>> 7w5d: Vi9 IPCP: O CONFREQ [Closed] id 1 len 10
>>> 7w5d: Vi9 IPCP: Address 209.104.172.1 (0x03062665AC01)
>>> 7w5d: Vi9 IPCP: I CONFREQ [REQsent] id 77 len 22
>>> 7w5d: Vi9 IPCP: Address 0.0.0.0 (0x030600000000)
>>> 7w5d: Vi9 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
>>> 7w5d: Vi9 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
>>> 7w5d: Vi9 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want
>>> 0.0.0.0 7w5d: Vi9 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we
>>> want 209.104.172.13 7w5d: Vi9 IPCP: O CONFREJ [REQsent] id 77 len 16
>>> 7w5d: Vi9 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
>>> 7w5d: Vi9 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
>>> 7w5d: Vi9 IPCP: I CONFACK [REQsent] id 1 len 10
>>> 7w5d: Vi9 IPCP: Address 209.104.172.1 (0x03062665AC01)
>>> 7w5d: Vi9 IPCP: I CONFREQ [ACKrcvd] id 78 len 10
>>> 7w5d: Vi9 IPCP: Address 0.0.0.0 (0x030600000000)
>>> 7w5d: Vi9 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want
>>> 209.104.172.13 7w5d: Vi9 AAA/AUTHOR/IPCP: Done. Her address
>>> 0.0.0.0, we want 209.104.172.13 7w5d: Vi9 IPCP: O CONFNAK [ACKrcvd]
>>> id 78 len 10 7w5d: Vi9 IPCP: Address 209.104.172.13 (0x03062665AC0D)
>>> 7w5d: Vi9 IPCP: I CONFREQ [ACKrcvd] id 79 len 10
>>> 7w5d: Vi9 IPCP: Address 209.104.172.13 (0x03062665AC0D)
>>> 7w5d: Vi9 AAA/AUTHOR/IPCP: Start. Her address 209.104.172.13, we
>>> want 209.104.172.13 7w5d: Vi9 AAA/AUTHOR/IPCP: Done. Her address
>>> 209.104.172.13, we want 209.104.172.13 7w5d: Vi9 IPCP: O CONFACK
>>> [ACKrcvd] id 79 len 10 7w5d: Vi9 IPCP: Address 209.104.172.13
>>> (0x03062665AC0D) 7w5d: Vi9 IPCP: State is Open 7w5d: Vi9 IPCP:
>>> Install route to 209.104.172.13 *Nov 26 00:46:50 UTC:
>>> %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access9,
>>> changed state to up 7w5d: Tnl 47262 L2TP: I Hello from
>>> sfldse34rr.mi.AADS tnl 55202 7w5d: Tnl 10005 L2TP: O Hello to
>>> drbrtj08rr.mi.AADS tnlid 36530 7w5d: Vi9 PPP: Missed 5 keepalives,
>>> taking LCP down 7w5d: Vi9 IPCP: State is Closed
>>> 7w5d: Vi9 PPP: Phase is DOWN [0 sess, 1 load]
>>> 7w5d: Vi9 Tnl/Cl 13221/50406 L2TP: O CDN to sfldse31rr.mi.AADS
>>> 22931/59466 7w5d: Vi9 Tnl/Cl 13221/50406 L2TP: Destroying session
>>> 7w5d: Vi9 Tnl/Cl 13221/50406 L2TP: Session state change from
>>> established to idle 7w5d: Vi9 Tnl/Cl 13221/50406 L2TP: Releasing
>>> idb for LAC/LNS tunnel 13221/22931 session 50406 state idle
>>> 7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>>> 7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>>> 7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>>> 7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>>> 7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>>> 7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>>> 7w5d: Vi9 PPP: Phase is ESTABLISHING, Passive Open [0 sess, 1 load]
>>> 7w5d: Vi9 LCP: State is Listen
>>> *Nov 26 00:49:43 UTC: %LINK-3-UPDOWN: Interface Virtual- Access9,
>>> changed state to down 7w5d: Vi9 LCP: State is Closed
>>> 7w5d: Vi9 PPP: Phase is DOWN [0 sess, 1 load]
>>> 7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>>> 7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>>> 7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>>> 7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>>> 7w5d: Vi9 VTEMPLATE: Ignoring free request, still in use
>>> 7w5d: Vi9 VPDN: Vtemplate failure 10 upon freeing interface
>>> 7w5d: Vi9 VTEMPLATE: Free vaccess
>>> 7w5d: Vi9 VTEMPLATE: Wait for line protocol to transition to down
>>> before freeing 7w5d: Vi9 IPCP: Remove route to 209.104.172.13
>>> *Nov 26 00:49:44 UTC: %LINEPROTO-5-UPDOWN: Line protocol on
>>> Interface Virtual-Access9, changed state to down
>>> 7w5d: Vi9 VTEMPLATE: Interface and line protocol are down, proceed
>>> to free 7w5d: Vi9 Debug: Condition 1, interface Vt1 cleared, count 0
>>> 7w5d: VTEMPLATE: Clean up dirty vaccess queue, size 1
>>> 7w5d: Vi9 VTEMPLATE: Found a dirty vaccess clone with vtemplate
>>> 7w5d: Vi9 VTEMPLATE: ************ UNCLONE VACCESS9 **************
>>> 7w5d: Vi9 VTEMPLATE: Unclone to-be-freed command#7
>>> interface Virtual-Access9
>>> default ip unnumbered loopback 2
>>> default ip address 209.104.172.1 255.255.255.128
>>> default ip address 209.104.172.1 255.255.255.128
>>> default ip address 209.104.172.1 255.255.255.128
>>> default mtu 1492
>>> default encap ppp
>>> default ip address
>>> end
>>>
>>> 7w5d: Vi9 VTEMPLATE: Remove cloneblk vtemplate with vtemplate
>>> 7w5d: Vi9 VTEMPLATE: Set default settings with no ip address
>>> 7w5d: Vi9 VTEMPLATE: Add vaccess to recycle queue, queue size 2
>>>
>>
>
> _______________________________________________
> cisco-bba mailing list
> cisco-bba at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-bba
More information about the cisco-bba
mailing list