[cisco-bba] PPPOE/PPPOA Duplicated address issue

Gaurav Sabharwal gaurav at inwire.net
Sun Feb 25 10:38:25 EST 2007


Mounir,

debug radius

and see what the router is getting from the radius server? If the IP 
address assigment is coming from the radius server, the router won't 
interfere until and unless it has been configured to do so.

Regards,
- Gaurav
on 02/25/2007 03:56 PM Mounir Mohamed said the following:
> Dear All,
> 
> I have one Cisco gear (7204-VXR NPE-300)used to terminate around 1500 
> PPPOA and PPPOE ADSL customers, but Decide to replace it by 
> Cisco7206-VXR NPE-G1 for more bandwidth and sessions, but we faced a 
> very weird behavior, the customers login and authenticated with the 
> Radius but they assigned the same IP address!!!!! and there is nothing 
> wrong appears on the Radius log, so any advice??
> 
> Note: i had change the IOS to different releases
> 
> 12.3-8-T11
> 12.3-22
> 12.4-T10
> 
> G1#sh users        
>     Line       User       Host(s)              Idle       Location
> *  0 con 0     admin       idle                 00:00:00  
> 
>   Interface    User               Mode         Idle     Peer Address
>   Vi4          test3              PPPoE        00:07:40 x.x.x.102
>   Vi5          test2              PPPoE        00:07:39 x.x.x.173
>   Vi6          test1              PPPoE        00:07:36 x.x.x.102
> -- 
> Best Reagrds,
> Mounir Mohamed


More information about the cisco-bba mailing list