[cisco-bba] cisco 10k cache flow and mss-adjust issues

Tassos Chatzithomaoglou achatz at forthnet.gr
Thu Mar 15 08:08:19 EST 2007



cc-cisco at eftel.com wrote on 15/3/2007 3:51 πμ:
> I was just wondering if anyone else had come across these problems or if I
> am just lucky...
> 
> We have a Cisco C10008 (PRE2-RP) doing l2tp-pppoe termination from various
> providers. Running IOS c10k2-p11-mz.123-7.XI9.bin.
> 
> a) It does not show or export any inbound flow data coming from the
> Virtual-Access(es). It shows and exports the data coming in the 1000baseT
> interfaces and back out the Vi or Gi fine.
> All interfaces have the "ip route-cache flow" command on them.
> 
Have you tried "ip flow ingress" instead?

We have the same problem (we still can't see the flows coming from va interfaces on the router), but they are exported fine (at 
least they seem so at the netflow server).

Also "ip flow-cache timeout inactive 60" could help you.

> b) The "ip tcp adjust-mss 1400" command also doesn't appear to be working.
> Possibly caused by the flow cache not working if it intercepts at the flow
> switching level?
> 
> Anyone see something like this with the 10k? or got some ideas to play with.
> 
> Thanks
> 
> Christian.
> _______________________________________________
> cisco-bba mailing list
> cisco-bba at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-bba
> 

-- 
Tassos



More information about the cisco-bba mailing list