[cisco-bba] Low bandwidth throuput on 7206 acting as LNS

[Ran Liebermann]

You have a lot of input errors on your Fa1/0.

8239 input errors, 8233 CRC

I would try to sort that out first.

--
Ran.


On 09/09/07, Thomas Koeppe <thomas_k_1 at gmx.net> wrote:
>
> Hi,
>
> we're working on a test szenario to terminate a small number of PPPoE
> users comming in through a l2tp tunnel. It seems that all works fine
> (l2tp tunnel is comming up, authentication and accounting against
> Freeradius server will work) except the low bandwidth throughput problem.
>
> As LNS we run a Cisco 7206 nonVXR with NPE-200, 96 MB RAM and 1
> FE-Interface. LAC is provided and maintained by our upstream telco. I
> know they run a Cisco 7206 VXR with NPE-G1.
>
> During the test setup there was only one customer connected to the lns.
> (2 Mbit/s down, 192 kbit/s up) Throughput after terminating the session
> on the lns was ~ 180 kbit/s down and ~ 160 kbit/s up.
>
> Any ideas how to fix this? Does someone see things which I doesn't see?
>
>
>
>
> Thanks,
> Thomas
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-bba/attachments/20070909/828dab96/attachment.html