[cisco-bba] Multiple IP Addresses

[Dermot Williams]

Hello all,

 

Quick, possibly stupid question for you all. If I want to assign
multiple addresses to a CPE using PPP(oE), can I use RADIUS attributes?
Or is the only way to achieve this by assigning a single IP address
using the 'Framed-IP-Address' attribute and then adding a static route
for one or more additional addresses to our LNS  (with a next-hop of the
RADIUS-assigned address)?

 

I'm 99.9% certain that I've just answered my own query but I'd
appreciate some feedback (I *crave* validation :P )

 

Thanks,

 

Dermot Williams

Senior Network Engineer

Irish Broadband Internet Services Ltd.

 







This message is for the named person's use only. It may contain confidential, proprietary or legally privileged information. No confidentiality or privilege is waived or lost by any mistransmission. If you receive this message in error, please immediately delete it and all copies of it from your system, destroy any hard copies of it and notify the sender. You must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message if you are not the intended recipient. Irish Broadband and any of its subsidiaries each reserve the right to monitor all e-mail communications through its networks. Any views expressed in this message are those of the individual sender, except where the message states otherwise and the sender is authorized to state them to be the views of any such entity.

Irish Broadband Internet Services Ltd, Registered in Ireland, Number: 357181, Registered Office: Burton Court, Burton Hall Road, Sandyford Industrial Estate, Dublin 18
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-bba/attachments/20080414/0e08b1a1/attachment.html