[cisco-bba] "NAS-Port = 0" with software upgrade on Cisco 7206VXR

[Frank Bulk - iNAME]

Yes, I've read that documentation.

But that's still outputting NAS-Port details as bits, not human-readable
text.  Alternately, I'm willing to go back to how it was in 12.2(26) where
the NAS-Port value was the Virtual-Interface value, but that's not any of
the options in "radius-server attribute nas-port format".

It seems I'm at a impass.

Frank

-----Original Message-----
From: Robert Blayzor [mailto:rblayzor.bulk at inoc.net] 
Sent: Saturday, July 19, 2008 9:24 AM
To: frnkblk at iname.com
Cc: cisco-bba at puck.nether.net
Subject: Re: [cisco-bba] "NAS-Port = 0" with software upgrade on Cisco
7206VXR

On Jul 19, 2008, at 12:32 AM, Frank Bulk wrote:
> I checked and the NAS-Port-Id is in the dictionary, but it doesn't
> log it to
> the regular log file.
>
> I'm looking into to re-writing the NAS-Port internet into something
> like you
> described: $slot/$module/$port/$vpi.$vci.
>
> But I'm still at a loss how to get the NAS-Port to reflect the virtual
> interface number rater than the incoming location.

http://www.cisco.com/en/US/customer/docs/ios/12_2t/secure/command/reference/
sftrad.html#wp1053876

and then the actual bit layout:

http://www.cisco.com/en/US/customer/docs/ios/12_1t/12_1t5/feature/guide/dtpp
prad.html


--
Robert Blayzor, BOFH
INOC, LLC
rblayzor at inoc.net
http://www.inoc.net/~rblayzor/