[cisco-bba] cisco dual wan atm

[Ben Steele]

You may want to look at doing end to end LMI keepalives on your frame-relay
circuit to actually pull the link down and remove the route from the rib.

 

From: cisco-bba-bounces at puck.nether.net
[mailto:cisco-bba-bounces at puck.nether.net] On Behalf Of Matteo
Sent: Sunday, 18 January 2009 9:33 PM
To: cisco-bba at puck.nether.net
Subject: [cisco-bba] cisco dual wan atm

 

Hi,

 

I have this problem, I work to ISP, in our pop we have a Cisco 7206VXR with
ATM card that manage all adsl and hdsl our customers, now we have this
pronblem, one customer have Cisco 1721 with wic-1adsl and wic-1t, he use
wic-1adsl by adsl that arrive to our Cisco 7206, and wic-1t with modem
frame-relay to atm that also arrive to our same Cisco 7206.

On Cisco 1721 at FA0 it have public subnet ip that can reacheable from adsl
and hdsl (frame-relay). 

He would use HDSL as primary line and adsl as backup. On 1721 I setup two
default route the first to s0.1 with 0 and second to atm0.1 with 10, so when
s0.1 go down it use atm0.1. From other side (inside our pop) on cisco 7206 I
use same conf but in route I use not interface but next hop, when it made
unreachable route don't delete and so not work ??

 

Thank you

 

Matteo

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-bba/attachments/20090119/3bc46959/attachment.html>