[cisco-bba] Specify PPPoE Virtual-Access Interface bandwidth on LNS via RADIUS/AAA

[Jon Simola]

On Wed, Jan 12, 2011 at 7:31 AM, Gary T. Giesen <giesen at snickers.org> wrote:
> Is there any way to specify the bandwidth on virtual-access interfaces
> (to be used for OSPF, QoS, etc) via RADIUS/AAA? I'm currently using
> "lcp:interface-config=bandwidth 4032\nbandwidth receive 800".

What does "sh int vi4 conf" show? What does the Virtual-Template look like?

Your radius thing works fine for me:
xxxxxxxx-A01#sh int vi4 | inc BW
  MTU 1492 bytes, BW 4032 Kbit/sec, RxBW 800 Kbit/sec, DLY 100000 usec,
xxxxxxxx-A01#sh int vi4 conf | inc band
 bandwidth 4032
 bandwidth receive 800


--
Jon