[cisco-bba] Specify PPPoE Virtual-Access Interface bandwidth on LNS via RADIUS/AAA

Gary T. Giesen giesen at snickers.org
Fri Jan 14 18:01:17 EST 2011


Sorry, missed this part....

#show int vi3 configuration
Virtual-Access3 is an VPDN link (sub)interface

Derived configuration : 200 bytes
!
interface Virtual-Access3
 mtu 1492
 bandwidth 155520
 bandwidth receive 800
 ip vrf forwarding TEST
 ip unnumbered Loopback64757
 ppp max-bad-auth 5
 ppp authentication pap
 random-detect
end


On Fri, Jan 14, 2011 at 5:59 PM, Gary T. Giesen <giesen at snickers.org> wrote:
> Virtual Template is:
>
> interface Virtual-Template1
>  mtu 1492
>  ip vrf forwarding TEST
>  ip unnumbered Loopback64757
>  ppp max-bad-auth 5
>  ppp authentication pap
>
> Per my original email:
>
> #show int vi4
> Virtual-Access4 is up, line protocol is up
>  Hardware is Virtual Access interface
>  Interface is unnumbered. Using address of Loopback64757 (172.23.254.254)
>  MTU 1492 bytes, BW 155520 Kbit/sec, RxBW 800 Kbit/sec, DLY 100000 usec,
>    reliability 255/255, txload 1/255, rxload 1/255
>  Encapsulation PPP, LCP Open
>  Open: IPCP
>  PPPoVPDN vaccess, cloned from AAA, Virtual-Template1
>
>
> As you can see, the receive bandwidth is being set, but not the send.
> If it works on your 7200 then it's probably a bug rather than a
> "missing feature" so maybe I'll go ahead and open a TAC case...
>
> GG
> On Thu, Jan 13, 2011 at 7:18 PM, Jon Simola <jsimola at gmail.com> wrote:
>> On Wed, Jan 12, 2011 at 7:31 AM, Gary T. Giesen <giesen at snickers.org> wrote:
>>> Is there any way to specify the bandwidth on virtual-access interfaces
>>> (to be used for OSPF, QoS, etc) via RADIUS/AAA? I'm currently using
>>> "lcp:interface-config=bandwidth 4032\nbandwidth receive 800".
>>
>> What does "sh int vi4 conf" show? What does the Virtual-Template look like?
>>
>> Your radius thing works fine for me:
>> xxxxxxxx-A01#sh int vi4 | inc BW
>>  MTU 1492 bytes, BW 4032 Kbit/sec, RxBW 800 Kbit/sec, DLY 100000 usec,
>> xxxxxxxx-A01#sh int vi4 conf | inc band
>>  bandwidth 4032
>>  bandwidth receive 800
>>
>>
>> --
>> Jon
>> _______________________________________________
>> cisco-bba mailing list
>> cisco-bba at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-bba
>>
>>
>



More information about the cisco-bba mailing list