[cisco-bba] To Shape or Police DSL Subscribers ??

[Frank Bulk]

Does 15.1S support IPv6 PBR?  I don't see it in the feature list, but just
checking.

 

Frank

 

From: cisco-bba-bounces at puck.nether.net
[mailto:cisco-bba-bounces at puck.nether.net] On Behalf Of Mauritz Lewies
Sent: Thursday, May 10, 2012 2:41 AM
To: Vaibhav Bagaria
Cc: cisco-bba at puck.nether.net
Subject: Re: [cisco-bba] To Shape or Police DSL Subscribers ??

 

Thanks I found 15.1S also works as 12.2 doesn't do all the features:

 

- 6VPE

- per-session shaping

- multicast-vpn

- pppoe

 

But my other problem is that the smallest sites have 3845s, which have
usually tracked the 7200s for features. However I can't find an IOS that
supports per-session shaping on the 3845s at all. 

Guess we're rolling some more 7200s...

 

Mauritz Lewies

 

On 10 May 2012, at 2:03 AM, Vaibhav Bagaria wrote:





Hi Mauritz,

 

We had similar issues (application of service policy on virtual-template
interfaces via RADIUS) with SRE release so we went back to 12.2(31)SB. Did
not have a chance to test SRD but Tony has had some luck with it!

 

Hope that helps.

 

Vaibhav

 

From: cisco-bba-bounces at puck.nether.net
[mailto:cisco-bba-bounces at puck.nether.net] On Behalf Of Tony
Sent: Wednesday, 9 May 2012 9:56 PM
To: Mauritz Lewies; cisco-bba at puck.nether.net
Subject: Re: [cisco-bba] To Shape or Police DSL Subscribers ??

 

We shape fine on 7200 with similar IOS.

 

#sh ver

Cisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version
12.2(33)SRD1, RELEASE SOFTWARE (fc4)

 

 

#sh policy-map  qos-pppoa-data-only-512k
  Policy Map qos-pppoa-data-only-512k
    Class class-default
      Average Rate Traffic Shaping
      cir 455000 (bps)
      service-policy data-only-policy

 

#sh policy-map int virtual-access 620
 Virtual-Access620
 SSS session identifier 16 -

  Service-policy output: qos-pppoa-data-only-512k

    Class-map: class-default (match-any)
      9084 packets, 1425724 bytes
      30 second offered rate 1000 bps, drop rate 0000 bps
      Match: any
        9084 packets, 1425724 bytes
        30 second rate 1000 bps
      Queueing
      queue limit 113 packets
      (queue depth/total drops/no-buffer drops) 0/0/0
      (pkts output/bytes output) 9085/1544857
      shape (average) cir 455000, bc 1820, be 1820
      target shape rate 455000

      Service-policy : data-only-policy

        Class-map: class-critical-data (match-any)
          1613 packets, 358537 bytes
          30 second offered rate 0000 bps, drop rate 0000 bps
          Match: ip dscp cs6 (48)
            1613 packets, 358537 bytes
            30 second rate 0 bps
          Match: ip dscp cs3 (24)
            0 packets, 0 bytes
            30 second rate 0 bps
          Queueing
          queue limit 83 packets
          (queue depth/total drops/no-buffer drops) 0/0/0
          (pkts output/bytes output) 1614/254008
          bandwidth 74% (336 kbps)

        Class-map: class-scavenger (match-any)
          0 packets, 0 bytes
          30 second offered rate 0000 bps, drop rate 0000 bps
          Match: ip dscp cs1 (8)
            0 packets, 0 bytes
            30 second rate 0 bps
          Queueing
          queue limit 50 packets
          (queue depth/total drops/no-buffer drops) 0/0/0
          (pkts output/bytes output) 0/0
          bandwidth 1% (4 kbps)


        Class-map: class-default (match-any)
          7471 packets, 1067187 bytes
          30 second offered rate 1000 bps, drop rate 0000 bps
          Match: any
            7471 packets, 1067187 bytes
            30 second rate 1000 bps

          queue limit 28 packets
          (queue depth/total drops/no-buffer drops) 0/0/0
          (pkts output/bytes output) 7471/1290849

 


  _____  


From: Mauritz Lewies <mauritz at three6five.com>
To: cisco-bba at puck.nether.net 
Sent: Wednesday, 9 May 2012 7:34 PM
Subject: Re: [cisco-bba] To Shape or Police DSL Subscribers ??






I see there was never a response to this?

 

It works fine on ASRs but I am having the same issues on 12.4T on a 7206
that we want to use in small POPs.

 

Shaping just doesn't seem to work and the BBA config guide has no mention of
traffic shaping...

On Tue, Feb 22, 2011 at 12:43 AM, Gerald Krause <gk at ax.tc> wrote:

Am 21.02.11 20:53, schrieb Gerald Krause:

> Is there any other thing that I may have overlooked?

Quick Question - do we need some kind of "Broadband License" to use this
feature? We are running a standard ADVIPSERVICES IOS 12.2(33)SRE2, no
special license and no ISG.


--
Gerald
_______________________________________________
cisco-bba mailing list
cisco-bba at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-bba

 


_______________________________________________
cisco-bba mailing list
cisco-bba at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-bba

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-bba/attachments/20120511/c22e5464/attachment.html>