[cisco-bba] Using more than one IP Local Pool

Juergen Marenda cnsp at marenda.net
Tue Jul 4 17:41:24 EDT 2017


> You don't need to have a contiguous IP block in an IP Pool. You can simply
> do something like this:
> 
> TestBNG(config)# ip local pool dynamic-dsl 192.168.0.0 192.168.255.255
> TestBNG(config)# ip local pool dynamic-dsl 172.16.0.0 172.31.255.255
> TestBNG(config)# ip local pool dynamic-dsl 10.0.0.0 10.255.255.255

Remember that there exists an special IPv4 Address-range for "Carrier Grade
NAT".

Why not assign fixed (real) IPv4/32 for each dial-up account ?

Just my 0.01 $

Juergen.



More information about the cisco-bba mailing list