<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD><TITLE></TITLE>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.3059" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>One other problem I hope someone can help
with</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Heres the senario</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>cisco 2611 with one wic-1adsl
installed</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>working great for about a year.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Install second wic-1adsl</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Config second dialer interface and establish
connection. Everything fine for about 20 minutes then dailer 1 drops. It will
not reastablish. as far as I can tell it does not even try.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>debugging tried so far</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>shutdown dialer 2 and atm0/1 </FONT></DIV>
<DIV><FONT face=Arial size=2> result: still no dial on dialer
1</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>completely erased config rebooted and rebuilt from
scratch. </FONT></DIV>
<DIV><FONT face=Arial size=2> result: was able to bring dialer
1 up then dialer 2, If dialer 1 dropped for any reason will not attempt to
reastablish</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>The really wierd part is I have an Identicle setup
in another location. and I mean 100% identicle except for obvious ip address
differences and it works fine.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Any ideas? I find it hard to believe it is a
hardware issue.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Mark Jones<BR>London Operations<BR>Managed Network
Systems<BR>171 Queens Ave Suite 515<BR>London Ontario<BR>N6A
5J7<BR>519-679-5207</FONT></DIV></BODY></HTML>